where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
1080 views
Career Discussions
James Mina
James Mina
02:16 Oct-13-2008
PCN Level 2 Plate Testing - Job chances - no experience

I'm currently in the process of doing a career change (long story) and been looking at going for my PCN Level 2 in Ultrasonic Testing.

From what I've been told so far I can only do my PCN Level 2 initially on Plate Testing and then go back and do the weld / pipe testing after I've got about 6 - 10 months formal work experience.

The only experience I have just now is a few shifts labouring for a mate.

I've got the oppertunity of going for the course and my mate seems to think I'd be able to get a job no problem with my PCN Level 2 PLATE only but before I go and fork out serious money and go for this course I would like external opinions.

What are the chances of getting employment in the UK or abroad either on a contract basis or permanent basis with little / no experience with PCN Level 2 PLATE Testing ?

Any assistance or feedback on this would be greatly appreciated.

Regards,

James




 
 Reply 
 
Muhammad Shoaib Anwar
NDT Inspector
Pakistan, Joined Dec 2006, 8

Muhammad Shoaib Anwar

NDT Inspector
Pakistan,
Joined Dec 2006
8
00:48 Oct-13-2008
Re: PCN Level 2 Plate Testing - Job chances - no experience
Dear James,

Still you have no experience of this field, but if you able to pass PCN Level 2 in UT, this mean you will able to continue this field, in start you will face difficulties in getting job, but once you successfully to get job with a reputable group then you have no problem regarding a good job. NDT like UT have much scope in UK as well as in Gulf.
I think 80% your decision depends on your PCN Level 2's result.

Regards

----------- Start Original Message -----------
: I'm currently in the process of doing a career change (long story) and been looking at going for my PCN Level 2 in Ultrasonic Testing.
: From what I've been told so far I can only do my PCN Level 2 initially on Plate Testing and then go back and do the weld / pipe testing after I've got about 6 - 10 months formal work experience.
: The only experience I have just now is a few shifts labouring for a mate.
: I've got the oppertunity of going for the course and my mate seems to think I'd be able to get a job no problem with my PCN Level 2 PLATE only but before I go and fork out serious money and go for this course I would like external opinions.
: What are the chances of getting employment in the UK or abroad either on a contract basis or permanent basis with little / no experience with PCN Level 2 PLATE Testing ?
: Any assistance or feedback on this would be greatly appreciated.
: Regards,
: James
------------ End Original Message ------------




 
 Reply 
 
ANDREW CUNNINGHAM
NDT Inspector
Canada, Joined Jun 2008, 238

ANDREW CUNNINGHAM

NDT Inspector
Canada,
Joined Jun 2008
238
03:41 Oct-13-2008
Re: PCN Level 2 Plate Testing - Job chances - no experience
----------- Start Original Message -----------
: I'm currently in the process of doing a career change (long story) and been looking at going for my PCN Level 2 in Ultrasonic Testing.
: From what I've been told so far I can only do my PCN Level 2 initially on Plate Testing and then go back and do the weld / pipe testing after I've got about 6 - 10 months formal work experience.
: The only experience I have just now is a few shifts labouring for a mate.
: I've got the oppertunity of going for the course and my mate seems to think I'd be able to get a job no problem with my PCN Level 2 PLATE only but before I go and fork out serious money and go for this course I would like external opinions.
: What are the chances of getting employment in the UK or abroad either on a contract basis or permanent basis with little / no experience with PCN Level 2 PLATE Testing ?
: Any assistance or feedback on this would be greatly appreciated.
: Regards,
: James
------------ End Original Message ------------

You may look to Alberta Canada, the economy is good with a shortage of inspectors. PCN is recognized by the Canadian CGSB.


 
 Reply 
 
imissiofE
imissiofE
02:02 Nov-25-2008
PayZeroMusic.com : Hello Dear all I think this will benefit all members here.
I finally got tired of getting virus and adware all the time from
using different software to get my mp3s from so I started to pay for
all my music on itunes, then last week my brother in Vegas shows me a
link to this site called http://www.PayZeroMusic.com where he gets all
his stuff from daily, totally free, he is a dj and uses the site to
get all his new stuff and classics.

Ever since he showed me I have been hooked, its super fast to download any songs or even full albums,
they even have a play button beside each song to hear it before
downloading and also have an online playlist, I loaded up my favorite
60 songs into it and now I just log in from anywhere and play all my
songs, the guys at work are totally hooked on the site like I now am
and I wanted to share the link with you all, remember it is 100% free,
nothing to ever pay for there.
http://www.PayZeroMusic.com


 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window