where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Come & join the membership of NDTSS, Gain access to international developments.

1654 views
Career Discussions
james
james
04:04 Oct-15-2008
NDT/UT Cert Transition

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?

Thanks

James


 
 Reply 
 
Neslihan Mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

Neslihan Mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
01:22 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.

Neslihan

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: Thanks
: James
------------ End Original Message ------------




 
 Reply 
 
ovidiu
NDT Inspector, thermography
ISCIR, Romania, Joined Dec 2005, 16

ovidiu

NDT Inspector, thermography
ISCIR,
Romania,
Joined Dec 2005
16
03:35 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.

: I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: Neslihan
: I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : Thanks
: : James
------------ End Original Message------------




 
 Reply 
 
james
james
03:41 Oct-15-2008
Re: NDT/UT Cert Transition
so the technology used would not be able to help transition to say the health care field?

----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
neslihan mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

neslihan mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
06:52 Oct-15-2008
Re: NDT/UT Cert Transition
according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
08:28 Oct-15-2008
Re: NDT/UT Cert Transition
Hi James,

As someone else stated, you give very little information as to what is the training gear to. Someone suggested that it might be ASTN TC-1A, but it is speculation. Even so, the training may not be recognised another employer or agency. I doné,t know where you live, but in Canada, things are getting a little tight as far as who can be recognised by our government to train other technician and it is understandable. You want people to be certified to a standard and this has to be kept under control.

Again, things may be different, but a few years back, I was contemplating going from Industrial Radiography to medical and after inquiry, realise that I still would have tp do the 4 years course at university. Again, I don"t know how old you are, but in my case, a little too old for this kind on endeavor.

Whatever you decide, I wish you luck.

Cheerio's
Michel

----------- Start Original Message -----------
: according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my optionsoutside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:47 Oct-15-2008
Re: NDT/UT Cert Transition
Pretty sure that 'health care inspectors' are regulated most places.

Training and certification requirements make NDT certification seem easy, that said, some Doctors get paid more than even phased array techs. Even training for basic medical radiography takes years.

Not sure your Level-II employer certification will take you very far down that road...

But good luck anyway.

Joe


----------- Start Original Message -----------
: so the technology used would not be able to help transition to say the health care field?
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window