where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1655 views
Career Discussions
james
james
04:04 Oct-15-2008
NDT/UT Cert Transition

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?

Thanks

James


 
 Reply 
 
Neslihan Mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

Neslihan Mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
01:22 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.

Neslihan

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: Thanks
: James
------------ End Original Message ------------




 
 Reply 
 
ovidiu
NDT Inspector, thermography
ISCIR, Romania, Joined Dec 2005, 16

ovidiu

NDT Inspector, thermography
ISCIR,
Romania,
Joined Dec 2005
16
03:35 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.

: I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: Neslihan
: I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : Thanks
: : James
------------ End Original Message------------




 
 Reply 
 
james
james
03:41 Oct-15-2008
Re: NDT/UT Cert Transition
so the technology used would not be able to help transition to say the health care field?

----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
neslihan mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

neslihan mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
06:52 Oct-15-2008
Re: NDT/UT Cert Transition
according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
08:28 Oct-15-2008
Re: NDT/UT Cert Transition
Hi James,

As someone else stated, you give very little information as to what is the training gear to. Someone suggested that it might be ASTN TC-1A, but it is speculation. Even so, the training may not be recognised another employer or agency. I doné,t know where you live, but in Canada, things are getting a little tight as far as who can be recognised by our government to train other technician and it is understandable. You want people to be certified to a standard and this has to be kept under control.

Again, things may be different, but a few years back, I was contemplating going from Industrial Radiography to medical and after inquiry, realise that I still would have tp do the 4 years course at university. Again, I don"t know how old you are, but in my case, a little too old for this kind on endeavor.

Whatever you decide, I wish you luck.

Cheerio's
Michel

----------- Start Original Message -----------
: according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my optionsoutside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:47 Oct-15-2008
Re: NDT/UT Cert Transition
Pretty sure that 'health care inspectors' are regulated most places.

Training and certification requirements make NDT certification seem easy, that said, some Doctors get paid more than even phased array techs. Even training for basic medical radiography takes years.

Not sure your Level-II employer certification will take you very far down that road...

But good luck anyway.

Joe


----------- Start Original Message -----------
: so the technology used would not be able to help transition to say the health care field?
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window