where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.

1652 views
Career Discussions
james
james
04:04 Oct-15-2008
NDT/UT Cert Transition

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?

Thanks

James


 
 Reply 
 
Neslihan Mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

Neslihan Mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
01:22 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.

Neslihan

I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: Thanks
: James
------------ End Original Message ------------




 
 Reply 
 
ovidiu
NDT Inspector, thermography
ISCIR, Romania, Joined Dec 2005, 16

ovidiu

NDT Inspector, thermography
ISCIR,
Romania,
Joined Dec 2005
16
03:35 Oct-15-2008
Re: NDT/UT Cert Transition
----------- Start Original Message -----------
That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.

: I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: Neslihan
: I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : Thanks
: : James
------------ End Original Message------------




 
 Reply 
 
james
james
03:41 Oct-15-2008
Re: NDT/UT Cert Transition
so the technology used would not be able to help transition to say the health care field?

----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
neslihan mahmutyazicioglu
Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd., Turkey, Joined Jul 2004, 8

neslihan mahmutyazicioglu

Director, - Lecturer and examiner and Level 3 consultant
NONNDT Technical Inspection Traning Qualification Consulting Ltd.,
Turkey,
Joined Jul 2004
8
06:52 Oct-15-2008
Re: NDT/UT Cert Transition
according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : Neslihan
: : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : Thanks
: : : James
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
08:28 Oct-15-2008
Re: NDT/UT Cert Transition
Hi James,

As someone else stated, you give very little information as to what is the training gear to. Someone suggested that it might be ASTN TC-1A, but it is speculation. Even so, the training may not be recognised another employer or agency. I doné,t know where you live, but in Canada, things are getting a little tight as far as who can be recognised by our government to train other technician and it is understandable. You want people to be certified to a standard and this has to be kept under control.

Again, things may be different, but a few years back, I was contemplating going from Industrial Radiography to medical and after inquiry, realise that I still would have tp do the 4 years course at university. Again, I don"t know how old you are, but in my case, a little too old for this kind on endeavor.

Whatever you decide, I wish you luck.

Cheerio's
Michel

----------- Start Original Message -----------
: according to New employer's written practice, for example with examination (spesific and practice examination) . Of course with succesfull examination results, new certification is possible----------- Start Original Message -----------
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my optionsoutside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:47 Oct-15-2008
Re: NDT/UT Cert Transition
Pretty sure that 'health care inspectors' are regulated most places.

Training and certification requirements make NDT certification seem easy, that said, some Doctors get paid more than even phased array techs. Even training for basic medical radiography takes years.

Not sure your Level-II employer certification will take you very far down that road...

But good luck anyway.

Joe


----------- Start Original Message -----------
: so the technology used would not be able to help transition to say the health care field?
: : That means the certs you'll get are valid only for the employer that issued'em. If you want to work for other employer these certs are not valid, but as hands on experience and traing it counts.
: : : I'in Ýstanbul-Turkey, If you give us explanation about (for example according to SNT-TC-1A) and I can help you.
: : : Neslihan
: : : I am currently working for a consulting company that is about to start a NDT/UT job. THey will have a company come in and train us while starting the project. Training will consist of 40 hour class time and aprox 600 hours 1:1 with a level 2 tech. At the end of the 600 hour OJT I (to make things simple) will have a limited level 2 certification. I have not received any clarification as to what that actually means at this point. My question is, if I find that this field is not for me what are my options outside of this field with this certification and knowledge?
: : : : Thanks
: : : : James
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window