where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ZETEC, Inc.
Zetec is a global leader in nondestructive testing (NDT) solutions for the critical inspection needs of industries the world counts on every day, ...

1890 views
Career Discussions
Filipe Matta
NDT Inspector
ITG, Portugal, Joined Nov 2008, 2

Filipe Matta

NDT Inspector
ITG,
Portugal,
Joined Nov 2008
2
06:12 Nov-05-2008
EMAT

I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
Can someone give me information on companies who provide EMAT devices that fulfill my needs?
Thanks
Filipe


 
 Reply 
 
Steve
Consultant, Advanced NDT Services
Advanced Integrity Solutions, USA, Joined Oct 2008, 1

Steve

Consultant, Advanced NDT Services
Advanced Integrity Solutions,
USA,
Joined Oct 2008
1
08:40 Nov-05-2008
Re: EMAT
Call Mark Adams at Spectrum Sales and Services

e-mail: markemat@aol.com

He has been in the business for over 10 years and is a wealth of knowledge.

Steve
----------- Start Original Message -----------
: I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: Can someone give me information on companies who provide EMAT devices that fulfill my needs?
: Thanks
: Filipe
------------ End Original Message ------------




 
 Reply 
 
Ron Alers
Director, - - President of EMAT Ultrasonics Inc.
USA, Joined Feb 2007, 4

Ron Alers

Director, - - President of EMAT Ultrasonics Inc.
USA,
Joined Feb 2007
4
00:16 Nov-07-2008
Re: EMAT
Dear Filipe,
Sonic Sensors of EMAT Ultrasonics Inc. has numerous industrial field service tools specifically designed for vessels, tanks, and piping. Please contact us at the numbers below and we can discuss all the possibilities. We have equipment for sale, license, or field service companies which can provide the service for you.

Cordially,
Ron Alers
----------- Start Original Message -----------
: I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: Can someone give me information on companies who provide EMAT devices that fulfill my needs?
: Thanks
: Filipe
------------ End Original Message ------------




 
 Reply 
 
Frank Passarelli
President
USA, Joined Jun 2005, 1

Frank Passarelli

President
USA,
Joined Jun 2005
1
01:39 Nov-07-2008
Re: EMAT
----------- Start Original Message -----------
: I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: Can someone give me information on companies who provide EMAT devices that fulfill my needs?
: Thanks
: Filipe
------------ End Original Message ------------

Filipe,

Resonic is a manufacturer of The ARIS line of EMAT based EMAR type systems. We can provide spot check as well as permanent sensor installations for such applications


 
 Reply 
 
Larry Hopper
Larry Hopper
04:32 Nov-07-2008
Re: EMAT
----------- Start Original Message -----------
: I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: Can someone give me information on companies who provide EMAT devices that fulfill my needs?
: Thanks
: Filipe
------------ End Original Message ------------

There is another alternative that is very effective. The alternative is Low Frequency Electromagnetics. This is used all over the world for tank wall scanning. Secondly, Balanced field eddy current is available for weld crack inspections. Contact TesTex for more information.


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
06:32 Nov-07-2008
Re: EMAT
At the risk of being a bit mundane, are you sure you need to use the exotic methods?

If you want to carry out wall thickness reduction surveys and weld depth integrity checking on pressure vessels then "conventional" gel/water coupled ultrasonics (whether with monoelement transducers, Phased array or AUT) is well accepted and code approved. EMAT and low frequency ET may work, but you will be off in a minefield of performance demonstation, limited availability of trained operators etc. I would recommed that you be certain you need to use these methods before you go down that route.

For weld cracking (as against problems at depth) then conventional Eddy current weld inspection or ACFM may be worth considering.

Rgds

Joe


----------- Start Original Message -----------
: : I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: : Cansomeone give me information on companies who provide EMAT devices that fulfill my needs?
: : Thanks
: : Filipe
: There is another alternative that is very effective. The alternative is Low Frequency Electromagnetics. This is used all over the world for tank wall scanning. Secondly, Balanced field eddy current is available for weld crack inspections. Contact TesTex for more information.
------------ End Original Message ------------




 
 Reply 
 
Mark Potter
Mark Potter
03:11 Nov-09-2008
Re: EMAT
Dear Filipe,

we make EMAT based inspection systems - if the pressure vessels are steel, we have an off-the-shelf system that should be suitable for wall thinning, and can make weld inspection EMAT systems bespoke.

Sincerely,

Mark

----------- Start Original Message -----------
: I'm looking for EMAT devices to inspect pressure vessels for flaw detections on welds and thickness reduction on walls of these equipments. This is to avoid using other tests like hidraulic and radiographic tests.
: Can someone give me information on companies who provide EMAT devices that fulfill my needs?
: Thanks
: Filipe
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window