where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
723 views
Technical Discussions
Gokhan Savaroglu
Consultant, -
Osmangazi University, Turkey, Joined Oct 1999, 5

Gokhan Savaroglu

Consultant, -
Osmangazi University,
Turkey,
Joined Oct 1999
5
01:16 Nov-02-2000
usd10

We have USD10. Can we use this instrument to measurement of ultrasonic velocity in liquids?



 
 Reply 
 
elgazery
Consultant
National Institute for Standards, Egypt, Joined May 2003, 10

elgazery

Consultant
National Institute for Standards,
Egypt,
Joined May 2003
10
07:18 Nov-05-2000
Re: usd10
Dear sir
You can you this instrument with approperate probe and arrangement to measure the ultrasonic
velocity of liquids either by incrporating oscilloscope in the system or directly by a ccurate
calibration for the instrument with a well known velocity standard material ( like attached
calibration block V1)

elgazery
National Institute for Standards
EGYPYT

: We have USD10. Can we use this instrument to measurement of ultrasonic velocity in liquids?





 
 Reply 
 
elgazery
Consultant
National Institute for Standards, Egypt, Joined May 2003, 10

elgazery

Consultant
National Institute for Standards,
Egypt,
Joined May 2003
10
04:17 Nov-05-2000
Re: usd10
: We have USD10. Can we use this instrument to measurement of ultrasonic velocity in liquids?

Dear sir
You can "use" (not the word "you") this instrument with approperate probe and arrangement to measure the ultrasonic
velocity of liquids either by incrporating oscilloscope in the system or directly by a ccurate
calibration for the instrument with a well known velocity standard material ( like attached
calibration block V1)

elgazery
National Institute for Standards
EGYPYT




 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window