where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
1152 views
Technical Discussions
Dr.Rajendran
R & D
MEPCO SCHLENK ENGINEERING COLLEGE, India, Joined Nov 2000, 3

Dr.Rajendran

R & D
MEPCO SCHLENK ENGINEERING COLLEGE,
India,
Joined Nov 2000
3
05:57 Nov-06-2000
high temperature ultrasonics materials characterisation


Dear Colleagues,

I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
06:23 Nov-06-2000
Re: high temperature ultrasonics materials characterisation
:
: Dear Colleagues,

: I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.

What is the temperature range over which you wish to work, what types of material are you testing, and what properties do you wish to examine? The answers to those questions will determine what equipment and techniques are appropriate.

You can find a basic introduction to ultrasonic material analysis on the Panametrics web site at:
www.panametrics.com/div_ndt/pages/theory/material.shtml

--Tom Nelligan




 
 Reply 
 
M. Kim Johnson
M. Kim Johnson
01:01 Nov-06-2000
Re: high temperature ultrasonics materials characterisation
: :
: : Dear Colleagues,

: : I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.

You may wish to consider Resonant Ultrasound Spectroscopy for this application. It has been used succesfully for material characterization up to about 1800° C, although the accuracy decreases as the temperature increases. Please check the web site (http://www.quasarintl.com/ruspec/ruspec.html. We do not build high temperature fixtures, but can provide a description of how to do so or put you in tough with someone who gas built one.

M. Kim Johnson


 
 Reply 
 
Marvin Klein
Marvin Klein
03:40 Nov-07-2000
Re: high temperature ultrasonics materials characterisation
:
: Dear Colleagues,

: I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.

If you are working at very high temperatures, laser ultrasonics allows characterization without contacting the sample. One good reference is "Laser Ultrasonics" by C. Scruby and L. Drain. You will also find some useful information on the Lasson web site (www.lasson.com).

Marvin Klein



 
 Reply 
 
Jan Verkooijen
Director,
Sonovation, Netherlands, Joined Nov 1998, 29

Jan Verkooijen

Director,
Sonovation,
Netherlands,
Joined Nov 1998
29
00:52 Nov-07-2000
Re: high temperature ultrasonics materials characterisation
You might be interested to know, that we have just completed a program of work
for detection and sizing of defects in welds at high temperature.
The highest temperature at which we performed an inspection was 400 degrees C
during the actual sitework. The process was fully validated on forehand up
to temperatures of 450 degrees C.
Thicknesses of the material varied from some 100 mm carbon steel to around 220 mm
in various configurations.

We will be placing some results on our website (www.sonovation.com) shortly.

Jan Verkooijen

:
: Dear Colleagues,

: I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.




 
 Reply 
 
Dr.V.RAJENDRAN
R & D
MEPCO SCHLENK ENGINEERING COLLEGE, India, Joined Nov 2000, 3

Dr.V.RAJENDRAN

R & D
MEPCO SCHLENK ENGINEERING COLLEGE,
India,
Joined Nov 2000
3
01:25 Nov-07-2000
Re: high temperature ultrasonics materials characterisation
: You might be interested to know, that we have just completed a program of work
: for detection and sizing of defects in welds at high temperature.
: The highest temperature at which we performed an inspection was 400 degrees C
: during the actual sitework. The process was fully validated on forehand up
: to temperatures of 450 degrees C.
: Thicknesses of the material varied from some 100 mm carbon steel to around 220 mm
: in various configurations.

: We will be placing some results on our website (www.sonovation.com) shortly.

: Jan Verkooijen

: :
: : Dear Colleagues,

: : I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.




 
 Reply 
 
Dr. V. RAJENDRAN
R & D
MEPCO SCHLENK ENGINEERING COLLEGE, India, Joined Nov 2000, 3

Dr. V. RAJENDRAN

R & D
MEPCO SCHLENK ENGINEERING COLLEGE,
India,
Joined Nov 2000
3
01:27 Nov-07-2000
Re: high temperature ultrasonics materials characterisation
: :
: : Dear Colleagues,

: : I would like to know the details of the high temperature experimental setup for ultrasonics materials characterisation.

: If you are working at very high temperatures, laser ultrasonics allows characterization without contacting the sample. One good reference is "Laser Ultrasonics" by C. Scruby and L. Drain. You will also find some useful information on the Lasson web site (www.lasson.com).

: Marvin Klein




 
 Reply 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window