where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

502 views
Technical Discussions
John Kitzmiller
John Kitzmiller
09:55 Nov-06-2000
magnetic fields!

Does D.C. currrent pick up surface discontinuities as well as
A.C. current? If not then what is the differential?


 
 Reply 
 
dave ronson
dave ronson
02:11 Nov-06-2000
Re: magnetic fields!
: Does D.C. currrent pick up surface discontinuities as well as
: A.C. current? If not then what is the differential?

Sure it does. However, AC will find surface indications must easier since it
>is a less penetrating current. Whereas DC has the ability to penetrate the
>material much easier due to the current being Direct and not alternating as
>in AC. The alternating aspect of AC allows the particles to "dance" on the
>surface allowing the particles to attract to a discontinuity much easier.





 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
07:15 Nov-07-2000
Re: magnetic fields!
: : Does D.C. currrent pick up surface discontinuities as well as
: : A.C. current? If not then what is the differential?

AC current passing through a conductor reverses its direction of flow at a regular frequency so that the electron movement is restricted to the surface of the conductor. The higher the frequency at which the current alternates then the greater will be the “skin effect”. As a consequence the magnetic field associated with AC flow is confined at or near the surface of the material.

DC current flows in a constant direction through a conducting material so that the electrons are moving throughout its cross section and length, although the movement is practically negligible at its centre becoming more pronounced as the surface is neared. The effect of passing DC through a conductive material is that the density of the resulting magnetic field is greatest at the surface of the conductor and becomes progressively weaker in a linear manner, as it penetrates towards the centre.

Kindest Regards


Michael Trinidad



 
 Reply 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window