where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1766 views
Career Discussions
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 92

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
92
01:32 Jan-04-2009
Interesting Use for MT

I found this while doing some research and thought it might be interesting to the community as an unusual use for NDT.

http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-3.pdf



 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
05:01 Jan-04-2009
Re: Interesting Use for MT
Interesting rearch document but the main report may be even more informative:

MAGNETIC PARTICLE RECOVERY OF SERIAL NUMBERS
Dave Utrata & Marcus J. Johnson
Midwest Forensics Resource Center
October 2003

http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-1.pdf

http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-2.pdf

----------- Start Original Message -----------
: I found this while doing some research and thought it might be interesting to the community as an unusual use for NDT.
: http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-3.pdf
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 897

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
897
08:21 Jan-04-2009
Re: Interesting Use for MT
I remember seeing MT used in this fashion on the TV show CSI. And I'm always skeptical of what they show on TV, specially when they deal with a topic that I am familiar with. Very often they stray away from the truth to captivate the audience. Yet I most admit, that after visiting that site and seeing those pictures, I've learned something new today.

Thanks a bunch,

Michel

----------- Start Original Message -----------
: Interesting rearch document but the main report may be even more informative:
: MAGNETIC PARTICLE RECOVERY OF SERIAL NUMBERS
: Dave Utrata & Marcus J. Johnson
: Midwest Forensics Resource Center
: October 2003
: http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-1.pdf
: http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-2.pdf
: : I found this while doing some research and thought it might be interesting to the community as an unusual use for NDT.
: : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-3.pdf
------------ End Original Message ------------




 
 Reply 
 
Dave Utrata
R & D,
Center for NDE, Iowa State University, USA, Joined Feb 2000, 37

Dave Utrata

R & D,
Center for NDE, Iowa State University,
USA,
Joined Feb 2000
37
06:22 Jan-05-2009
Re: Interesting Use for MT
If anyone is further interested, please feel free to contact me directly as that work was mine.
I also saw the use of mag particle for forensic recovery on CSI, and the way they implemented the technique really was far fetched and over dramatized for TV. Plus, I look nothing like Marg Helgenberg!

In any case, there are limitations and "tricks" to using this method for serial number recovery, and I'd be happy to discuss this with interested parties. I've used this method to varying degrees of success on firearms and old machinery identification plates.

----------- Start Original Message -----------
: I remember seeing MT used in this fashion on the TV show CSI. And I'm always skeptical of what they show on TV, specially when they deal with a topic that I am familiar with. Very often they stray away from the truth to captivate the audience. Yet I most admit, that after visiting that site and seeing those pictures, I've learned something new today.
: Thanks a bunch,
: Michel
: : Interesting rearch document but the main report may be even more informative:
: : MAGNETIC PARTICLE RECOVERY OF SERIAL NUMBERS
: : Dave Utrata & Marcus J. Johnson
: : Midwest Forensics Resource Center
: : October 2003
: : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-1.pdf
: : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-2.pdf
: : : I found this while doing some research and thought it might be interesting to the community as an unusual use for NDT.
: : : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-3.pdf
------------ End Original Message ------------




 
 Reply 
 
Fred Raco, Jr.
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco, Jr.

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
07:11 Jan-05-2009
Re: Interesting Use for MT
Here is another useful trick that not too many people know of. If you are required to examine a non-magnetic weld where the reinforcement has been machined or ground away, and you are not sure of exactly where the weld is, the use of an AC yoke & red powder will usually reveal the toe(s) of the weld rather easily. We use this technique, based on the permiability differences between the base metal and the filler metal, to mark the weld for radiography.


 
 Reply 
 
Adam Stasuk
NDT Inspector, - -
Stasuk Testing & Inspection Ltd., Canada, Joined Mar 2008, 29

Adam Stasuk

NDT Inspector, - -
Stasuk Testing & Inspection Ltd.,
Canada,
Joined Mar 2008
29
02:31 Jan-06-2009
Re: Interesting Use for MT
----------- Start Original Message -----------
: If anyone is further interested, please feel free to contact me directly as that work was mine.
: I also saw the use of mag particle for forensic recovery on CSI, and the way they implemented the technique really was far fetched and over dramatized for TV. Plus, I look nothing like Marg Helgenberg!
: In any case, there are limitations and "tricks" to using this method for serial number recovery, and I'd be happy to discuss this with interested parties. I've used this method to varying degrees of success on firearms and old machinery identification plates.
: : I remember seeing MT used in this fashion on the TV show CSI. And I'm always skeptical of what they show on TV, specially when they deal with a topic that I am familiar with. Very often they stray away from the truth to captivate the audience. Yet I most admit, that after visiting that site and seeing those pictures, I've learned something new today.
: : Thanks a bunch,
: : Michel
: : : Interesting rearch document but the main report may be even more informative:
: : : MAGNETIC PARTICLE RECOVERY OF SERIAL NUMBERS
: : : Dave Utrata & Marcus J. Johnson
: : : Midwest Forensics Resource Center
: : : October 2003
: : : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-1.pdf
: : : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-2.pdf
: : : : I found this while doing some research and thought it might be interesting to the community as an unusual use for NDT.
: : : : http://www.mfrc.ameslab.gov/R-D_Reports/Magnetic_particle_Final-3.pdf
------------ End Original Message ------------

We have been doing Serial number verification for many years now on modified Harley Davidson Motorcycle frames. Typically the WFMPI DC is the most sensitive to residual trace indentations but you have to consider orientation, AC seemed to be just as effective in most cases. Usually we are doing this at the request of a potential buyer who doesn't trust the seller or occasionally we have had the insurance companies ask us to verify if the frame under claim is hasn't been switched. I have not seen any requests in the last couple years though - maybe different serializing techniques nowadays or smarter crooks?


 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window