where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

395 views
Technical Discussions
young chul jung
young chul jung
06:30 Nov-09-2000
stress field

Hi all!!

If there is a specimen subjected to any kind of loading, i would like to find out how much load was applied in that specimen (most likely a specific point of interest) by ultrasonic technique. is it possible?

please provide me any advise.

thanks very much



 
 Reply 
 
Kris Smestad
Kris Smestad
06:38 Nov-10-2000
Re: stress field
Hello Young...

What was the specimen
type, dimensions, wall thickness, etc...? There may be a way to make that determination with AE.

-Kris
: Hi all!!

: If there is a specimen subjected to any kind of loading, i would like to find out how much load was applied in that specimen (most likely a specific point of interest) by ultrasonic technique. is it possible?

: please provide me any advise.

: thanks very much




 
 Reply 
 
Jens Forker
Jens Forker
00:00 Nov-13-2000
Re: stress field
Dear Young

as Kris already wrote, AE may help you by using the Kaiser-Effekt: if you (mechanically) load and unload a sample, then reload again you will not get AE unless you exceed the previous load level.
This is not generally true under all circumstances, but is used in different applications.

regards
Jens

: Hi all!!

: If there is a specimen subjected to any kind of loading, i would like to find out how much load was applied in that specimen (most likely a specific point of interest) by ultrasonic technique. is it possible?

: please provide me any advise.

: thanks very much




 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window