where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
2364 views
Technical Discussions
Marshal Clark
Marshal Clark
06:04 Nov-13-2000
Journal of Acoustic Emission

Does anyone know who publishes the Journal of Acoustic Emission and where I can contact them?


 
 Reply 
 
Jens Forker
Jens Forker
09:16 Nov-13-2000
Re: Journal of Acoustic Emission
: Does anyone know who publishes the Journal of Acoustic Emission and where I can contact them?

The editor is Professor Kanji Ono (ono@seas.ucla.edu)

Regards
Jens Forker




 
 Reply 
 
Dr.Sotirios J. Vahaviolos
R & D, -
MISTRAS Group, Inc., USA, Joined Jan 2000, 15

Dr.Sotirios J. Vahaviolos

R & D, -
MISTRAS Group, Inc.,
USA,
Joined Jan 2000
15
05:46 Mar-03-2001
Re: Journal of Acoustic Emission
: : Does anyone know who publishes the Journal of Acoustic Emission and where I can contact them?
.
:
: some info.@ same
.It is published by "Acoustic Emission Group" in Los Angeles
California.You should contact directly Prof.Kanji Ono
at UCLA who is the Editor

E-mail Address(es):
ono@ucla.edu
Good luck
Sotirios





 
 Reply 
 
sanjay kumar singh
sanjay kumar singh
00:51 Jun-07-2001
Re: Journal of Acoustic Emission
Does anyone no how i can get some paper from this journal because my institution don't have this journal
if anyone inform me then i will be obliged for him
thanking you





 
 Reply 
 
Dr.Sotirios J. Vahaviolos
R & D, -
MISTRAS Group, Inc., USA, Joined Jan 2000, 15

Dr.Sotirios J. Vahaviolos

R & D, -
MISTRAS Group, Inc.,
USA,
Joined Jan 2000
15
04:00 Jun-07-2001
Re: Journal of Acoustic Emission
: Does anyone no how i can get some paper from this journal because my institution don't have this journal
: if anyone inform me then i will be obliged for him
: thanking you
.
.The Journal is produced by Prof. K. Ono of UCLA :
E-mail Address(es):
ono@ucla.edu
I am sure that Prof. Ono or one of his students will help you.
Sotirios





 
 Reply 
 
Jens Forker
Jens Forker
01:52 Jan-10-2002
Re: Journal of Acoustic Emission
Journal of AE is published by Professor Kanji Ono (ono@seas.ucla.edu) at UCLA, USA.

Regards
Jens Forker

: : Does anyone know who publishes the Journal of Acoustic Emission and where I can contact them?
:
.



 
 Reply 
 
Jens Forker
Jens Forker
04:10 Nov-14-2002
Re: Journal of Acoustic Emission
the editor of Journal of AE is:

University of California
Dept.of Material Science & Engineering
Professor Kanji Ono
6531 Boelter Hall,
Los Angeles, CA 90095
USA
e-Mail: ono@ucla.edu

regards
Jens

: i am working in area AE
: i want to publish my work in your journal
: please send details on my mail
.



 
 Reply 
 
Dr.Sotirios J. Vahaviolos
R & D, -
MISTRAS Group, Inc., USA, Joined Jan 2000, 15

Dr.Sotirios J. Vahaviolos

R & D, -
MISTRAS Group, Inc.,
USA,
Joined Jan 2000
15
04:59 Nov-14-2002
Re: Journal of Acoustic Emission
: i am working in area AE
: i want to publish my work in your journal
: please send details on my mail


.The best place to publish your work is in the Journal of Acoustic Emission published by:Acoustic Emission Group,Enrino,CA USA.Its editor is a well known Professor and authority in Acoustic Emission,Prof.Kanji Ono of UCLA.He can be found at (310)825-5233 and e-mail ONO, Prof. Kanji,E-mail Address(es):ono@ucla.edu.Keep in-mind also that the ndt.net also publishes articles as does Materials Evaluation magazine of ASNT and other technical societies.





 
 Reply 
 
rahim ranjbar
rahim ranjbar
08:06 Dec-23-2002
Re: Journal of Acoustic Emission
please send me informations about the AE method.


 
 Reply 
 
Jens Forker
Jens Forker
02:28 Jan-08-2003
Re: Journal of Acoustic Emission
Please send your full address details to sales@vallen.de
We will send you an information package by mail.
regards
Jens Forker

: please send me informations about the AE method.
.



 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window