where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1511 views
Technical Discussions
Amedeo Marino
Amedeo Marino
04:08 Nov-27-2000
inspection of Pipelines on rack

We have been asked to perform UT inspection of pipelines held by a rack at some meters of height.
Does anyone know which method can be employed and if there is a company performing this kind of inspection ?

Thanks.

Amedeo.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:06 Nov-27-2000
Inspection of Pipelines on rack
The Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:07 Nov-27-2000
Inspection of Pipelines on rack
The Lixi Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
05:07 Nov-27-2000
Inspection of Pipelines on rack
The Lixi Profiler is being used in Australia to measure the total pipe wall thickness and support beam thickness.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
04:36 Nov-28-2000
Re: inspection of Pipelines on rack
One of the ways to do screening is to use Guided Wave Ultrasonics. If the pipe is uninsulated you can screen considerable distances from one access point onto the pipe.

We can assist you with this.

Please feel free to contact me for more details

John O'Brien
obirc@aol.com



 
 Reply 
 
Doug Breeze
Director, Consultant; R&D
Inspection Software Limited, United Kingdom, Joined May 2000, 20

Doug Breeze

Director, Consultant; R&D
Inspection Software Limited,
United Kingdom,
Joined May 2000
20
06:40 Nov-28-2000
Re: inspection of Pipelines on rack
More details of the task needed, really. But for UT of the welds, local corrosion and HIC mapping you could use an automated UT system.

Some P-scan UT info available at ...
http://www.inspection.co.uk/p-scan
http://www.p-scan.com



 
 Reply 
 
mohammad mosa shabanian
mohammad mosa shabanian
01:21 Dec-02-2000
Re: inspection of Pipelines on rack
: More details of the task needed, really. But for UT of the welds, local corrosion and HIC mapping you could use an automated UT system.

: Some P-scan UT info available at ...
: http://www.inspection.co.uk/p-scan
: http://www.p-scan.com




 
 Reply 
 

Product Spotlight

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window