where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

- Login

Home Exhibition Archive Forum Jobs Members Events Directory NDT A-Z

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing

457 views

Technical Discussions

Lee Bird

05:58 Nov-04-1999
Simulation Software

Greetings,

I am trying to develop an angle beam procedure to test 6" nozzles
welded to a Pressure Vessel. These nozzles have reinforcement
saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

Thanks
Lee Bird

			Reply
Translate Close

Jacques Parent

08:22 Nov-04-1999
Re: Simulation Software : Greetings,

: I am trying to develop an angle beam procedure to test 6" nozzles
: welded to a Pressure Vessel. These nozzles have reinforcement
: saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

: Thanks
: Lee Bird

We are using a software called IMAGINE 3D. You can get more information at www.utex.com
tel. 905-828-1313
Good luck
jp

			Reply
Translate Close

mahammd salehi

07:00 Dec-11-2000
Re: Simulation Software : : Greetings,

: : I am trying to develop an angle beam procedure to test 6" nozzles
: : welded to a Pressure Vessel. These nozzles have reinforcement
: : saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

: : Thanks
: : Lee Bird

: We are using a software called IMAGINE 3D. You can get more information at www.utex.com
: tel. 905-828-1313
: Good luck
: jp

			Reply
Translate Close

You will receive an email when a new message of this topic appears

Product Spotlight
IntraPhase Athena Phased Array System
Stand WesDyne International (AMDATA Products)
The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>
9 Showcases
FD800 Bench Top Flaw Detectors
Stand Elcometer NDT
The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>
3 Showcases 3 Videos
NEW Wheel Type Phased Array Probe
Stand Doppler Electronic Technologies Co., Ltd
DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>
18 Showcases 9 Videos
HARDNESS TESTER TKM-459CE combi
Stand MASHPROJECT LLC
TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>
5 Showcases
more Showcases

Share...

Home

Exhibition