where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

793 views
Technical Discussions
Mohammed S. Al-A'ala
Engineering
Saudi Aramco, Saudi Arabia, Joined Dec 2000, 3

Mohammed S. Al-A'ala

Engineering
Saudi Aramco,
Saudi Arabia,
Joined Dec 2000
3
08:23 Dec-16-2000
Manager Field's Inspection Checklists Form

Hi Every One:

I wonder if any one knows/experiances about what are any Plant Manager or Key Personal should ask or highlight during his/her Field Inspectiong tour?

If there is a Field Inspection Cheklist Form, then please e-mail it to me ASAP.

Thanks,


 
 Reply 
 
Guido Crapels
Guido Crapels
08:54 Dec-20-2000
Re: Manager Field's Inspection Checklists Form
r decisions, so you should look into the installation's performance and incident history in order to establish an overview of (possible) problems and bottle necks.
The inspection task is always embedded in a larger economical field, since the installation has to be run with some kind of profit.
For a more general look at things, try to find out more about the API RP 579 Fitness-For-Service document, a set of recommended practice rules, and look for the interference of these kind of rules with your inspection job. Then, you can make more focussed inquiries as to what applies to your environment best and we could help you with more dense info.
Finally, never forget: safety overrules money (= time, man hours, resources, ...).


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:17 Jan-08-2001
Re: Manager Field's Inspection Checklists Form
Most codes, standards and recommended practices provide actual inspection checklists not a supervisory level.
Supervisors & Managers are normally monitoring 'system' implementation so checklists should be developed from the actual system manuals, codes etc. in place much as would be completed prior to a typical Quality Audit.
Concentrate on those items that ensure the system works:
Inspection Procedures - do the exist? are the encompassing the equipment covered? are they being followed?
Personnel - are they trained? are benchmarks such as certification in place to ensure correct training? is continuing skills and education in place?
Are you using correct codes & standards? - are they up to date?, is there an updating process?

Typical but many more aspects will come in depending upon each operation.

Regards



 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window