where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

791 views
Technical Discussions
Mohammed S. Al-A'ala
Engineering
Saudi Aramco, Saudi Arabia, Joined Dec 2000, 3

Mohammed S. Al-A'ala

Engineering
Saudi Aramco,
Saudi Arabia,
Joined Dec 2000
3
08:23 Dec-16-2000
Manager Field's Inspection Checklists Form

Hi Every One:

I wonder if any one knows/experiances about what are any Plant Manager or Key Personal should ask or highlight during his/her Field Inspectiong tour?

If there is a Field Inspection Cheklist Form, then please e-mail it to me ASAP.

Thanks,


 
 Reply 
 
Guido Crapels
Guido Crapels
08:54 Dec-20-2000
Re: Manager Field's Inspection Checklists Form
r decisions, so you should look into the installation's performance and incident history in order to establish an overview of (possible) problems and bottle necks.
The inspection task is always embedded in a larger economical field, since the installation has to be run with some kind of profit.
For a more general look at things, try to find out more about the API RP 579 Fitness-For-Service document, a set of recommended practice rules, and look for the interference of these kind of rules with your inspection job. Then, you can make more focussed inquiries as to what applies to your environment best and we could help you with more dense info.
Finally, never forget: safety overrules money (= time, man hours, resources, ...).


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:17 Jan-08-2001
Re: Manager Field's Inspection Checklists Form
Most codes, standards and recommended practices provide actual inspection checklists not a supervisory level.
Supervisors & Managers are normally monitoring 'system' implementation so checklists should be developed from the actual system manuals, codes etc. in place much as would be completed prior to a typical Quality Audit.
Concentrate on those items that ensure the system works:
Inspection Procedures - do the exist? are the encompassing the equipment covered? are they being followed?
Personnel - are they trained? are benchmarks such as certification in place to ensure correct training? is continuing skills and education in place?
Are you using correct codes & standards? - are they up to date?, is there an updating process?

Typical but many more aspects will come in depending upon each operation.

Regards



 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window