where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing
989 views
Technical Discussions
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
09:06 Oct-10-2000
Air Coupled UT Market Study

Dear experts,

I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

Thank you very much!

Martin Heinz.


 
 Reply 
 
Jean-Louis ARNAUD
Jean-Louis ARNAUD
09:17 Oct-10-2000
Re: Air Coupled UT Market Study
: Dear experts,

: I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: Thank you very much!

: Martin Heinz.




 
 Reply 
 
Jean-Louis ARNAUD
Jean-Louis ARNAUD
09:17 Oct-10-2000
Re: Air Coupled UT Market Study
: Dear experts,

: I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: Thank you very much!

: Martin Heinz.




 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
09:00 Oct-31-2000
Re: Air Coupled UT Market Study
Dear Mr. Heinz,

I think, with the improvements done in the past, with the equipment available on the market and with upcomming developements especially in transducer techniques, the aircoupled ultrasound will have a great future especially in the field of advanced structures and materials for aircraft design.
Especially composites and sandwich structures open a wide field of possible inspection applications.
Since some years we investigate the capabilities of aircoupled ultrasound. Starting with simple through transmission testing of honeycomb sandwich (CFRP/NOMEX or CFRP-foam) to materials like GLARE or ARALL the next consequent step is application of lambwave testing. With lambwave setups I think there are already a lot of applications to solve. I know that the Univ. of Strathclyde already worked since several years on the use of receiver arrays for aircoupled US; and I guess there are already systems in operation in the european aeronautic industry using array setups.

Maybe this helps a little for your survey.
W.Bisle, EADS Airbus GmbH Bremen


 
 Reply 
 
ying qin
ying qin
05:51 Jan-12-2001
Re: Air Coupled UT Market Study
: : Dear experts,

: : I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: : For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: : Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: : Thank you very much!

: : Martin Heinz.




 
 Reply 
 
ying qin
ying qin
06:08 Jan-12-2001
Re: Air Coupled UT Market Study
I'm looking for air-coupled Ultrasonic Tranducers used for inspection of composites. It should operate at frequences roughly 200 khz or higher with broadband.

Any help would be appreciated

Thanky und best regards

ying qin

research engineerin, DLR

: : Dear experts,

: : I am collecting any information for doing a market research concerning to NDT based on air coupled UT.
: : For that I would like to start a discussion where I receive your opinions on the numbers of users and applications of air coupled UT in contrast to other ultrasonic testing methods (contact, immersion, water beam coupling). I also would like to receive your opinions of possible future applications for air coupled UT if more advanced probes would be available (e.g. 1D and 2D ultrasonic arrays with high bandwidth and frequencies).
: : Anybody who takes part on the discussion or follows the discussion can profite of the opinions of each other.

: : Thank you very much!

: : Martin Heinz.




 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window