where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
215 views
Job Offers
D.Wilson
D.Wilson
08:28 Feb-13-2006
LEVEL II UT INSPECTORS

Job Location: TEXAS
offered by  

TesTex Inc. is searching for 6-8 Level II UT Technicians for a 6-9 month project near Amarillo, TX. Project dates are approx. 3/20/06 to 11/06.

We would like to hire out of Houston, TX and then place the personnel near Amarillo for the duration of the project.

We are looking for Level II UT Techs with experience using DMS 2 and Epoch IIIs & IVs, for thickness and B-Scan. Experience working for BPAmoco is a plus. You must be able to prove your classroom training hours for UT, and OTJ experience in UT.

We will be training a subset of the staff on the proprietary TesTex Low Frequency Electromagnetic Technique (LFET) for tank and pressure vessel scanning.

This project has a strong possibility of turning into full time permanent positions with either TesTex or a sister NDT company.

The rate of pay can range from $19.00/hour to $23.00/hour straight time, plus OT; the average hours per week should be 50+. TesTex will provide Rooms/Lodging. Perdiem for meals will be provided on a weekly basis. There will be (3) one-week breaks around Memorial Day, 4th of July, and Labor Day of which the travel time to and from Amarillo will be paid to a maximum of (8) hours each way. There are bonuses set aside for the staff that stay through the duration of the project, which can range from $2,500.00 to $4,500.00 per staff member payable at the end of the project.

Pre-employment Drug Screening is mandatory, and testing for cause and/or random drug screening will occur over the duration of the project. A pre-employment background check will also take place to ensure a valid drivers license and negative history of felonies.

Please email resume to d.wilson@testex-ndt.com with “Amarillo, TX” in the subject line, or fax resume to 412-798-8995 with “Amarillo, TX” on the cover page.


 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window