where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

207 views
Job Offers
D.Wilson
D.Wilson
08:28 Feb-13-2006
LEVEL II UT INSPECTORS

Job Location: TEXAS
offered by  

TesTex Inc. is searching for 6-8 Level II UT Technicians for a 6-9 month project near Amarillo, TX. Project dates are approx. 3/20/06 to 11/06.

We would like to hire out of Houston, TX and then place the personnel near Amarillo for the duration of the project.

We are looking for Level II UT Techs with experience using DMS 2 and Epoch IIIs & IVs, for thickness and B-Scan. Experience working for BPAmoco is a plus. You must be able to prove your classroom training hours for UT, and OTJ experience in UT.

We will be training a subset of the staff on the proprietary TesTex Low Frequency Electromagnetic Technique (LFET) for tank and pressure vessel scanning.

This project has a strong possibility of turning into full time permanent positions with either TesTex or a sister NDT company.

The rate of pay can range from $19.00/hour to $23.00/hour straight time, plus OT; the average hours per week should be 50+. TesTex will provide Rooms/Lodging. Perdiem for meals will be provided on a weekly basis. There will be (3) one-week breaks around Memorial Day, 4th of July, and Labor Day of which the travel time to and from Amarillo will be paid to a maximum of (8) hours each way. There are bonuses set aside for the staff that stay through the duration of the project, which can range from $2,500.00 to $4,500.00 per staff member payable at the end of the project.

Pre-employment Drug Screening is mandatory, and testing for cause and/or random drug screening will occur over the duration of the project. A pre-employment background check will also take place to ensure a valid drivers license and negative history of felonies.

Please email resume to d.wilson@testex-ndt.com with “Amarillo, TX” in the subject line, or fax resume to 412-798-8995 with “Amarillo, TX” on the cover page.


    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window