where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
334 views
Job Offers
Hanna Hasan
Hanna Hasan
09:31 Feb-13-2006
Non Destructive Technicians

Job Location: Nationwide Opportunities
offered by  

X-R-I Testing, a division of X-RAY Industries, Inc has been providing Aerospace NDT/NDI services for over 65 years. We are headquartered in Troy, MI and have locations nationwide including Western Michigan, Ohio, South Carolina, Oregon, Virginia, and Alabama. The Company generates over $40 million in revenue. We meet Quality and Certification Requirements of ISO 9002, Guide 25, Military Standards, ASTM, ASME, AWS, and 21 CFR. We have over 265 employees including NDT professionals from coast to coast. Our quality focus has remained unchanged for over six decades.


Due to rapid growth, we have the following Non –Destructive Testing positions available at the following laboratory locations:

Greenville, South Carolina
Woodward Facility–
UT Level 1 or 2 (prefer contact method will consider immersion)
GE Airfoils-
RT Level 2 (PT is a plus) (need documented exp & certifiable to NAS 410 )

Greenwood, South Carolina
Kaiser Aluminum Facility -
PT Level 2 (prefer forging exp, high paced production inspecting control arms)

Hampton, VA
RT Level 2 (Experience reading industrial gas turbine investment cast blades and vanes and/or titanium and nickel base aircraft structural investment castings.)


Cleveland, OH
In-house laboratory, general industry experienced technicians certifiable to NAS 410
Level 2-MT, PT, or UT (cross trained in 2 or more is a plus)

Troy, MI-
MT&PT Level 2 Inspectors certifiable in one or both. (Must be certifiable to NAS 410, other aircraft standards i.e. IAW, NDTQ, EMS 52349, BSS 7698) Experience using wet fluorescent technique Mag particle and water washable/post emulsifiable penetrant methods)

If you desire to join a growing company and meet the requirements for the job, please apply by emailing your resume to hr@xrayindustries.com or fax it to 248-362-4422. We offer competitive wages and benefits i.e., medical, dental insurance, healthcare reimbursement accounts, life, accidental death& dismemberment insurance, short& long-term disability, vacation, holiday pay and much more.

X-RAY Industries Inc. is an Equal Opportunity Employer.



 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window