where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
323 views
Job Offers
Hanna Hasan
Hanna Hasan
09:31 Feb-13-2006
Non Destructive Technicians

Job Location: Nationwide Opportunities
offered by  

X-R-I Testing, a division of X-RAY Industries, Inc has been providing Aerospace NDT/NDI services for over 65 years. We are headquartered in Troy, MI and have locations nationwide including Western Michigan, Ohio, South Carolina, Oregon, Virginia, and Alabama. The Company generates over $40 million in revenue. We meet Quality and Certification Requirements of ISO 9002, Guide 25, Military Standards, ASTM, ASME, AWS, and 21 CFR. We have over 265 employees including NDT professionals from coast to coast. Our quality focus has remained unchanged for over six decades.


Due to rapid growth, we have the following Non –Destructive Testing positions available at the following laboratory locations:

Greenville, South Carolina
Woodward Facility–
UT Level 1 or 2 (prefer contact method will consider immersion)
GE Airfoils-
RT Level 2 (PT is a plus) (need documented exp & certifiable to NAS 410 )

Greenwood, South Carolina
Kaiser Aluminum Facility -
PT Level 2 (prefer forging exp, high paced production inspecting control arms)

Hampton, VA
RT Level 2 (Experience reading industrial gas turbine investment cast blades and vanes and/or titanium and nickel base aircraft structural investment castings.)


Cleveland, OH
In-house laboratory, general industry experienced technicians certifiable to NAS 410
Level 2-MT, PT, or UT (cross trained in 2 or more is a plus)

Troy, MI-
MT&PT Level 2 Inspectors certifiable in one or both. (Must be certifiable to NAS 410, other aircraft standards i.e. IAW, NDTQ, EMS 52349, BSS 7698) Experience using wet fluorescent technique Mag particle and water washable/post emulsifiable penetrant methods)

If you desire to join a growing company and meet the requirements for the job, please apply by emailing your resume to hr@xrayindustries.com or fax it to 248-362-4422. We offer competitive wages and benefits i.e., medical, dental insurance, healthcare reimbursement accounts, life, accidental death& dismemberment insurance, short& long-term disability, vacation, holiday pay and much more.

X-RAY Industries Inc. is an Equal Opportunity Employer.



 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window