where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
218 views
Job Offers
Metalogic Inspection Services
Metalogic Inspection Services
08:13 Mar-06-2006
See posting

Job Location: Edmonton, Alberta + Canada, US
offered by  

Metalogic Inspection Services is an advanced NDE technology developer and service provider, focused in the power generation, pipeline integrity and Oil & Gas industries. We are a young company experiencing rapid growth due to a high demand for our inspection services and our new patented technologies.

We are seeking senior ultrasonic technicians who have an eye for quality and a strong work ethic. The applicants should have a desire to work with new technology including phased array and laser inspection techniques. Project locations would include the Edmonton area, Canada, U.S. and potential overseas projects for those interested.

FULL TIME, EDMONTON BASED, POSITIONS ARE IMMEDIATELY AVAILABLE for candidates that have an interest in implementation of new technologies, and techniques in the Power Generation Industry. This would involve procedure development, procedure qualification, and field testing.

PIPELINE INTEGRITY PROJECT POSITIONS starting this April in both the U.S. and Canada requires Senior and Junior U.T. Technicians. Training will be provided over the course of 3 weeks through Metalogic’s industry leading Pipeline Integrity and Laser Corrosion Mapping course.

In addition to the basic union remuneration, Metalogic offers vehicle allowance, gain share, and extensive training. Those who are interested should apply through our website at http://www.metalogicinspection.com in the careers section and fill out the application form. Please send all resumes and application forms to ktoner@metalogicinspection.com.



    
 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window