where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.
228 views
Job Seeks
Pradip kumar sil
Pradip kumar sil
07:36 Apr-16-2006
QA/QC engineer

Job Location: europe, canada, australia, newzeland


Plot no. 306, Sector 31A,
Vashigaon, Vashi,
Navi Mumbai : 400 027
Mob : +91-9833844636
Phone - +91-22-27811393 / +91-33-27081036
E-mail:pradip200320012000@yahoo.co.in
: pradipsil@gmail.com


Pradip Kumar Sil

ANNEXURE


WORK EXPERIENCE:

Total six years experience including nine months gulf experience.

1. Worked in Arabian Pipeline & Services Co. Ltd. (Anabeeb) in the Kingdom of Saudi Arabia as QA/ QC engineer from 31.05.2005 to 21.02.2006. The company is one of the leading companies in the kingdom in the field of industrial services and turnaround maintenance projects and is a joint venture company of Mourick, The Netherlands and Al Osais, Saudi Arabia.

Job Duties & Responsibilities:

Till date have independently handled various QA/ QC aspects related to mechanical jobs and painting/ coating works in several petrochemical plants in the kingdom during shutdown maintenance. Some of the companies include Saudi Aramco, Ar Razi, Samad, Sadaf etc. Have madequite an indelible contribution in company’s QA/ QC department and have proved to be an asset to the department according to seniors and colleagues. Have got hands on exposure in preparing QC dossier required to be submitted along with project closure report. Various job duties and responsibilities include:

Material identification
Equipment inspection
Fit up, root & final welding inspection of pipe joints
Giving NDTclearance of weld joints in piping work
Coating work inspection
Pump & motor alignment inspection
Pigging inspection
Modification up date of isometric drawing & P&ID
Assist commissioning activities of new line
Engg. Documentation & qa/qc dossier
Liaising with clients for approval & dealing with contractor

1. Worked In NICCO Corporation Ltd. (Project Division) an ISO 9001 Company as a QC Engineer from 01.11.2002 to 04.05.2005.

a. Worked at Nuclear Power Corporation of India Ltd. Kaiga 3&4 Unit (Each Capacity 234 MW), Dist: Uttar Kannada, Karnataka.
Job Duties & Responsibilities:

Was involved in main steam piping from steam generator at reactor building to the turbine island and related balance of plant to the steam generator unit. Total quantum of work involved was around 125,000 inch dia of weld joints of pipes. Various job duties and responsibilities include:

Material Identification
Fit-up, root and final welding inspection of pipe joints (up to 28” dia. & 20.62 mm thk. max of P-1 & P-5 material)
Giving NDT clearance of weld joints in piping work.
Judging the requirement of preheating and PWHT of weld joints of high thickness, arranging the same, witnessing such tests and giving final clearance.
Documentation
Liaising with clients for approval.

The project called for stringent inspection by NPCIL.

b. Worked at Rajasthan Atomic Power Plant, Kota, Rajasthan.

Job Duties & Responsibilities:

Was involved in main steam piping from steam generator at reactor building to the turbine island and related balance of plant to the steam generator unit. Total quantum of work involved was around 125,000 inch dia of weld joints of pipes. Various job duties and responsibilities include:

Material Identification
Fit-up, root and final welding inspection of pipe joints (up to 28” dia. & 20.62 mm thk. max of P-1 & P-5 material)
Giving NDT clearance of weld joints in piping work.
Judging the requirement of preheating and PWHT of weld joints of high thickness, arranging the same, witnessing such tests and giving final clearance.
Documentation
Liaising with clients for approval.

This project also called for stringent inspection by NPCIL.

3. From 15.02.01 to 14.02.02 worked in Public Works (Roads) Dept. as an apprentice and was involved in maintenance of different earth moving machineries.

4. From 12.05.98 to 15.06.2000 worked in M/S Power Electrical Industries as a QA/QC supervisor for pipe work in Kolkata and was involved in material identification, checking of fit-up and alignment, root run and final welding of pipe joints (P-1 material).


 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window