where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
214 views
Job Offers
XRI Testing
XRI Testing
03:32 Jul-26-2006
L2 PT

Job Location: Greenwood,SC
offered by  

The Greenwoodlaboratory is looking for NDT Level II individuals to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications in Liquid penetrant.

The NDT Level II should be thoroughly familiar with the scope and limitations of the methods for which qualified; with specific strengths working within aerospace and automotive inspection requirements and should expect to exercise assigned responsibility for on-the-job training (OJT) and guidance of trainees and NDT Level I personnel. The NDT Level II shall be able to organize and report the results of NDT tests.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned:
•Performs and maintains written quality requirements associated with X-R-I Testing procedure manual and Customer requirements.
•Establishes work instruction and technical data sheets for set-up and processing of inspection programs. Submits data to Level III for approval.
•Accepts or rejects the customers’ products based on standards provided and records and reports specific inspection data.
•Interprets and implements customer directed specifications and standards.
•Directly assists in the training and qualification of trainees and Level I personnel through on-the-job training practices as defined by Level III.
•Expands and increases knowledge of the applicable NDE method and/ or other methods not qualified for in preparation of qualification for Level I, II or III certification as applicable.
•Uses of job tracking analysis to assure efficient and profitable operations are conducted.
•Qualifications for certification (NAS410) with Aerospace and Automotive Experience



    
 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window