where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.
212 views
Job Offers
XRI Testing
XRI Testing
03:32 Jul-26-2006
L2 PT

Job Location: Greenwood,SC
offered by  

The Greenwoodlaboratory is looking for NDT Level II individuals to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards and specifications in Liquid penetrant.

The NDT Level II should be thoroughly familiar with the scope and limitations of the methods for which qualified; with specific strengths working within aerospace and automotive inspection requirements and should expect to exercise assigned responsibility for on-the-job training (OJT) and guidance of trainees and NDT Level I personnel. The NDT Level II shall be able to organize and report the results of NDT tests.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned:
•Performs and maintains written quality requirements associated with X-R-I Testing procedure manual and Customer requirements.
•Establishes work instruction and technical data sheets for set-up and processing of inspection programs. Submits data to Level III for approval.
•Accepts or rejects the customers’ products based on standards provided and records and reports specific inspection data.
•Interprets and implements customer directed specifications and standards.
•Directly assists in the training and qualification of trainees and Level I personnel through on-the-job training practices as defined by Level III.
•Expands and increases knowledge of the applicable NDE method and/ or other methods not qualified for in preparation of qualification for Level I, II or III certification as applicable.
•Uses of job tracking analysis to assure efficient and profitable operations are conducted.
•Qualifications for certification (NAS410) with Aerospace and Automotive Experience



    
 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window