where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

191 views
Job Offers
Dominic D'Almeida
Dominic D'Almeida
09:37 Aug-09-2006
ROpe Access Technicians

Job Location: Angola / Nigeria
offered by  

Oceaneering Inspection Division is a major provider of engineering, Inspection and Non-Destructive Testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking for the Rope Access Level I or II technicians with NDT qualifications (as detailed below) for an upcoming project in Angola / Nigeria:
PCN or ASNT UT or RT Level 2
PCN or ASNT MPI Level 2
PCN or ASNT DP Level 2
Eddy Current Inspection (If possible)

Personnel interested in working overseas are requested to forward current CV with certificate copies by email to recruit_inspection@oceaneering.com or ddalmeida@oceaneering.com

For more details please contact:
Mr. Dominic D'Almeida
Operations Co-Ordinator
Inspection Division
UAE Tel. : +971-4-3117635
Aberdeen Tel. : +44-1224-758929
Email : recruit_inspection@oceaneering.com


    
 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window