where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

253 views
Job Offers
Pavi Toor
Pavi Toor
00:46 Aug-11-2006
NDT Level I and II needed

Posted by  
Job Location: Delta, BC, Canada

RESPONSIBILITIES
* Set up and calibrate NDT equipment for test and evaluation
* Conduct test, interpret and evaluate test results
* Document test and evaluation results
* Supervise and guide Level I technologist
* Write inspection procedure and techniques for Level III approval.
* Develop testing techniques
* Review and implement customer and industry codes and specifications.

REQUIREMENTS
* Post secondary education in engineering (Mechanical, Metallurgical, Aeronautical, or equivalent)
* Minimum 1 years experience as UT Level II
* Experience in RT, ET a plus
* Familiar with metal to metal bond, composite, welding an asset
* Capable of understanding of metallic and non-metallic materials (Aluminum, Steel,
* Composite, Titanium) and their properties
* Basic understanding of computer applied testing and proficiency in MS Office (MS word,
* Excel, PowerPoint)
* Ability to execute efficiently test schedule.
* Skillful in basic technical writing
* Ability to work without supervision
* Very good communication skills
* Organized and capable to work in a 5S environment

Avcorp offers a competitive compensation and benefit package, while fostering equal opportunity employment. Please email resumes to careers@avcorp.com and insert “QA Tech.” in the subject line.


 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window