where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

252 views
Job Offers
Pavi Toor
Pavi Toor
00:46 Aug-11-2006
NDT Level I and II needed

Posted by  
Job Location: Delta, BC, Canada

RESPONSIBILITIES
* Set up and calibrate NDT equipment for test and evaluation
* Conduct test, interpret and evaluate test results
* Document test and evaluation results
* Supervise and guide Level I technologist
* Write inspection procedure and techniques for Level III approval.
* Develop testing techniques
* Review and implement customer and industry codes and specifications.

REQUIREMENTS
* Post secondary education in engineering (Mechanical, Metallurgical, Aeronautical, or equivalent)
* Minimum 1 years experience as UT Level II
* Experience in RT, ET a plus
* Familiar with metal to metal bond, composite, welding an asset
* Capable of understanding of metallic and non-metallic materials (Aluminum, Steel,
* Composite, Titanium) and their properties
* Basic understanding of computer applied testing and proficiency in MS Office (MS word,
* Excel, PowerPoint)
* Ability to execute efficiently test schedule.
* Skillful in basic technical writing
* Ability to work without supervision
* Very good communication skills
* Organized and capable to work in a 5S environment

Avcorp offers a competitive compensation and benefit package, while fostering equal opportunity employment. Please email resumes to careers@avcorp.com and insert “QA Tech.” in the subject line.


 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window