where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
386 views
Job Seeks
Muhammad shtiaq Shah
Consultant, Quality control engineer
Worldwide, Joined Sep 2006, 1

Muhammad shtiaq Shah

Consultant, Quality control engineer
Worldwide,
Joined Sep 2006
1
09:07 Sep-16-2006
welding inspector

Job Location: world wide

Seek: Any where: QA/QC/WELDING
Posted by: muhammad ishtiaq shah, E-mail: mueshtiaq@yahoo.com.com, on sep.15, 2006 at 2100:
Respected Sir,


I am ASNT LEVEL II in PT,UT,MT & CSWIP-3.1 ,I have about 12 years of working experience, especially in the field WELDING,QA/QC. I am looking for a suitable position to work in the above mentioned area .I would be very grateful if you could consider my candidate and give me opportunity to work in your esteemed company. I assure you, sir that I will serve your esteemed company to your entire satisfaction.


Thanking you,

Yours faithfully,
MUhammad Ishtiaq Shah
Cell#0071-50-6526331



 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window