where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
330 views
Job Seeks
S.R.G.PRABHU
Consultant, AUT specialist
FREELANCE, India, Joined Aug 2008, 64

S.R.G.PRABHU

Consultant, AUT specialist
FREELANCE,
India,
Joined Aug 2008
64
05:12 Dec-03-2006
CSWIP AUT PHASED ARRAY/ASNT LEVEL III/AWS-SCWI

Job Location: ANYWHERE IN THE WORLD

I am cuurently working for STATOIL-Norway in offshore Iran as AUT client inspector in pipelay project since Sep 2006.
In Feb, Iwas in China,after an AUT job demo for clients. Previously worked offshore Sakhalin as client inspector. 2001-2003 was AUT auditor for Shell deepwater Nigeria-offshore/onshore.Level III RT,UT.SCWI-AWS.Current Survival. I have completed the training and examination in TWI Middlesbrough for the AUT data interpreter for phased array .I have worked on and offshore for more than 16 years in France, Russia, Nigeria, Angola, China, Oman, Qatar, Saudi and India.
I am willing to take any additional training in phased array, TOFD etc.S.R.G.PRABHU, M.Sc,
ASNT LEVEL III UT, RT
SCWI-AWS,CSWIP AUT DATA INTERPRETER LEVEL II
No-3 ,II street,Maris avenue,
Collector's office road,
Cantonment, Trichy-1
Tamilnadu state India
Collector's office road, Cantonment,
Trichy-1
Tamilnadu state


 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window