where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1550 views
Technical Discussions
Theodoros Theodoulidis
Teacher, Researcher
University of Western Macedonia, Greece, Joined Dec 1999, 5

Theodoros Theodoulidis

Teacher, Researcher
University of Western Macedonia,
Greece,
Joined Dec 1999
5
01:47 Feb-15-2001
Wood moisture measurement

I believe that the two main methods of wood moisture measurement are:
1) The drying oven method
2) The electric method
I want to ask if I can measure it by using UT, since I have seen that ultrasonic velocity is affected by moisture content.
Is there active research on the subject?



 
 Reply 
 
Bernd Wolter, IZFP, Saarbruecken, Germany
Bernd Wolter, IZFP, Saarbruecken, Germany
04:04 Feb-15-2001
Re: Wood moisture measurement
You also can measure moisture by a variety of other nondestructive methods. Some companies offer commercial hand-held sensors based on electrical resistivity measuring for wood moisture determination. Besides, dielectric methods (capacitice methods, microwaves, time-domain reflectometry), thermographic methods and x-ray methods are used for it.

A survey about wood moisture measurement is given by: Melhorn L., Plinke B.; "Zum Stand der Feuchtemessung an Massivholz", Holz-Zentralblatt 120, p. 1837, 1990 (in German). Ultrasound for wood moisture measurement is used e.g. by: Bernatowicz G., Matejak M.; "Application of Ultrasound Time Measurements for Moisture Content detection During Drying", Proc. 1st Europ. Symp. Nondestructive Evaluation of Wood, 21.-23. Sept. ‘94, Sopron, Paper 4, 1994.

At IZFP, we are using NMR (Nuclear Magnetic Resonance) in One-Sided Access for depth-profiling of the moisture content in wood. In contrast to other nondestructive methods, NMR does also allows to determine detph-profiles of wood density. Therefore it is possible to determine absolute moisture contents in mass-%.


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 262

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
262
04:22 Feb-15-2001
Re: Wood moisture measurement
: I believe that the two main methods of wood moisture measurement are:
: 1) The drying oven method
: 2) The electric method
: I want to ask if I can measure it by using UT, since I have seen that ultrasonic velocity is affected by moisture content.
: Is there active research on the subject?
.
Such research can be relatively easy done. If you are interested, we can test it, using transmission of air ultrasound through the wood.
We have ready made devices, suitable for this purpose.
It seems for me, that it should work, but needs many tests to calibrate the measurement.

Wieslaw Bicz



 
 Reply 
 
Nikolay Kostadinov Ganchev
Nikolay Kostadinov Ganchev
01:49 Apr-28-2001
Re: Wood moisture measurement
Dear sir
Please,send my more information for wood moisture measurement and methods of wood moisture measuring.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
06:14 Apr-29-2001
Wood moisture measurement
The Lixi Profiler will measure moisture amount in wood
whose thickness is the same.



 
 Reply 
 
nazmi yetim
nazmi yetim
07:04 Apr-12-2002
Re: Wood moisture measurement
: Dear sir
: Please,send my more information for wood moisture measurement and methods of wood moisture measuring.
.b



 
 Reply 
 
N.T. Azarov
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

N.T. Azarov

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
07:19 Apr-14-2002
Re: Wood moisture measurement
: : Dear sir
: : Please,send my more information for wood moisture measurement and methods of wood moisture measuring.
: .b
.


Dear sir.
We develop a meter of humidity of wood by a capacity method - "humidity meter VD-1". The instrument allows to measure of relative (%) humidity of wood on depth up to 30-40mm, while other similar instruments measure humidity only in surface layers. The instrument has the switch, depending on a type of a tree.
Nowadays instrument is used by us for definition of presence of a moisture in aircraft honeycomb constructions from composite materials.
The instrument is portable, mass 200g. The power supply is carried out from the accumulator.



 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window