where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TWI

230 views
Job Offers
Heidi Hoffman , E-mail:
Heidi Hoffman , E-mail:
07:53 Apr-17-2007
NDT Field Representative - IL

Job Location: Chicago, IL
offered by  

Technician - Successful candidate will perform NFPA certification testing on Aerial Devices and Pumpers (including aerial component weldment inspections), and Ground Ladders. and Pumpers. Work includes Field evaluations of fire apparatus by the using NDT testing methods includingof magnetic particle, visual, ultra-sound, and liquid penetrant. Candidate must be willing to travel on occasionextensively and must have good interpersonal and communication skills. Job requires someone who is detail-oriented and can report data accurately and timely.
AAS in Non-Destructive Testing or Equivalent.
Candidate must possess a strong mechanical/electrical aptitude and technical ability. Knowledge of Non-Destructive testing required. Candidate with previous certification to CP 189 or SNT-TC-1A in any of the above four methods is a plus. Must be able to work in confined spaces, must be able to lift at least 70lbs. Candidate must meet vision requirements as listed in CP 189. Must be able to work in elevated spaces. Requires good computer skills in Microsoft Word and Excel, IBM Laptop Computer/Lotus Notes. Position requires travel.

To apply please e-mail resume in MS Word format to Heidi Hoffman at: fldjobs@us.ul.com


    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window