where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

272 views
Job Offers
Stan Light
Stan Light
09:46 May-01-2007
NDT/welding inspector

Posted by  
Job Location: Ulsan Korea

We are seeking an inspection company to provide inspection/NDT services in Ulsan, Korea. The work covers the inspection of large heavy steel weldments for Hydro turbine components. The ideal company would have past experience in this type of equipment, or at least in large casting inspection. The frequency and duration is two (2) 8 hour days per week for one base year and an option for two additional years. There are 2 additional option years.

*************************************************
Advise rough budget pricing for: base year in Korea

1) one trip per week to Ulsan, Korea with 8 hours at site (labor, travel and expenses) each week for one year. ( 45 trips)
2) 45 additional days of inspection at site ( second day at site in trips above).

Option 1 (2nd year)
second year - 28 trips with 28 extra days

Option 2 (3rd year)
Third year - 45 trips with 45 extra days

Inspection company must read write and speak English and provide weekly written reports with photos

Inspectors must be ASNT level II or equal

All pricing in $USD
Need is immediate - inspections could start in the next month.

Advise
Thank you
Stan Light
SCL Engineering & Inspection


 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window