where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
233 views
Job Offers
Oceaneering International
Inspection Services Provider : Company
Oceaneering International Dubai LLC, United Arab Emirates (UAE), Joined Aug 2008, 32

Oceaneering International

Inspection Services Provider : Company
Oceaneering International Dubai LLC,
United Arab Emirates (UAE),
Joined Aug 2008
32
07:34 Jun-11-2007
Senior Opeartor

Posted by  
Job Location: Nigeria

Oceaneering Inspection Division is a major provider of engineering, Inspection and Non-Destructive Testing services with world wide capability to the petrochemical, power generation, oil and gas and aerospace industries.

We are currently looking following personnel for long-term offshore / onshore work.
Job Title: Senior Operator
Location: Nigeria

Candidates should possess the following qualifications:

JOB OBJECTIVE(S)

- Responsible for the safe and efficient operation of the assigned plants on a shift basis.

DUTIES & RESPONSIBILITIES

- Assist the Operators in the performance of routine duties as defined by the shift supervisor or by operational instructions.
- Maintains a thorough knowledge of current operational status of the part of the plant and equipment in the process area that he is responsible for by reference to daily instructions, logbooks and shift change over communications.
- Carries out safety checks during the performance of maintenance activities.
- Ensure that defects as observed are reported and maintenance effectively followed up.
- Assist the shift instructor in the training and development of operative technicians.
- Assist in the analysis and solution of operational problems.
- Performs process maintenance tasks on a need basis
- Take part in emergency exercises and fire-fighting training organised by his supervisors and the safety department.
- Acknowledge the signed clearance certificates and monitors the satisfactory completion of the job.
- Monitors panel operation of the area appointed to him.
- Liaises with the laboratory to obtain sample results and adjusts the process, after discussions with his supervisor, to maintain on-specification conditions.

KEY PERFORMANCE INDICATORS
- Optimization of plant to meet production targets.
- Number of process violations
- Response time to resolve issues/problems.
- Number of trips affecting production (less than 30)
- Timeliness and accuracy of reports.

JOB REQUIREMENTS
Education - OND/HND in Engineering or Chemical Engineering
Experience - Less than 3 years experience

KEY COMPETENCY REQUIREMENTS

Knowledge
Industry Knowledge
Relevant regulations
LNG production

Skill
Problem Solving

REPORTING RELATIONSHIPS

Functionally reports to
POP – Shift Suprintendent
Administratively reports to
POP – Shift Suprintendent

Supervises

Excellent rates of pay will be offered to successful candidates.

To apply in confidence, please email a copy of your current CV and valid certificates to Joslene Kotian / Dominic D’Almeida at recruit_inspection@oceaneering.com

Joslene Kotian / Dominic D’Almeida
Recruitment – Oceaneering Inspection
UAE Tel. : +971-4-3117533 / +971-4-3117635
Aberdeen Tel. : +44-1224-758929
Email : recruit_inspection@oceaneering.com


 
 

Product Spotlight

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window