where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
206 views
Job Offers
Jakub Walasek
Jakub Walasek
09:22 Jun-14-2007
Senior Inspector

Job Location: western europe
offered by  

COMPANY:is an international group with a core business of conformity assessment, applied in the areas of quality, health, safety, environment and social responsibility

RESPONSIBILITY:
Review of applicable contractual requirements (technical standards, specifications, etc).
Definition and review of Quality Plan and the relevant procedures
Review and validation of inspection assignment documentation (technical aspects, reference documentation, schedule, milestones, reporting, logistics, co-ordination procedure, etc)
Selection of the most appropriate inspection techniques
Execution or supervision of inspection according to predefined Quality Plan, and to the established inspection procedures / techniques
Execution of inspection reporting including treatment of non-conformities (NCR’s) and other applicable deliverables
Ensuring quality of inspection according to Quality System
Interpretation of results of inspections
Treatment of the NCR’s and the corrective actions
Review and appraisal of inspection procedures
Maintaining internal and external communication
Management of one or more inspectors
Design and delivery of training for inspectors
Promotes BV portfolio to clients
Respects security guidelines and safeguards personal security in the working environment
Actively participates in the sharing of knowledge and information (Knowledge management)
Continuous learning and developing in his area of responsibility

REQUIREMENTS:
(Advanced) Vocational training or equivalent qualification / experience
5-6 years of experience
Fully conversant with the key standards and inspection procedures for the concerned field (able to select most appropriate reference standard / inspection- criteria)
Acts as a recognised expert in the relevant area
Able to design and to deliver training modules
Able to verify and establish Quality Plan or Inspection Testing Plan
Able to manage one or more Junior Inspectors
PC Skills, Good English and local language skills


 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window