where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

495 views
Job Offers
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:18 Jul-09-2007
NDT Instructor

Posted by  
Job Location: Calgary, Alberta

Non Destructive Testing (NDT) Instructor

Job Type: Full Time
Location: Calgary, AB, CANADA;
Job Category: Education, Skilled Trades
Industry: Technology
Year(s) of Experience: 5
Number Of Positions: 1
Date Posted: Jul 4, 2007

NON DESTRUCTIVE TESTING (NDT) INSTRUCTOR

SCHOOL OF Manufacturing & Automation
COMPETITION #: 386-06-MH

The School of Manufacturing & Automation at SAIT requires an individual to provide instructional services within the Non Destructive Testing (NDT) program. In addition, the incumbent will provide assistance in program development and planning as well as facilitate CGSB examinations.


RESPONSIBILITIES:

· Know, understand, apply and relate to students the essential facts, concepts, procedures and principles in areas of expertise designated by the curriculum, using a variety of instructional techniques, which promote learning and personal development.

· Create lesson plans, exams, quizzes and modules for student use

· Assist in the development of curriculum

· Show personal interest in the learner and create a climate conducive to optimal learning.

QUALIFICATIONS:

The successful applicant will have a minimum of 5 years recent NDT experience accompanied by the completion of Level II in MPI, LPI and RT. Preference will be given to candidates possessing all five current CGSB level 2 certificates (RT, UT, ET, MT, PT). Additional trade certifications, degrees, metallurgical/materials training and familiarity with ASME and CSA codes would be an asset. Previous experience in teaching or program development would be beneficial.

NOTE: This is a full time salaried position to June 30, 2008 with a possibility of extension.

OPEN TO: SAIT Employees and the Public

SALARY: Commensurate with education and experience plus excellent benefits

COMPETITION #: 386-06-MH

CLOSING: This position will remain open until suitable candidates have been found

TO APPLY: If you meet the requirements of this position and wish to apply, please continue with this on-line application. SAIT is committed to Employment Equity and invites applications from all qualified individuals.

NOTE: The preferred method of application is on-line. Notification of receipt will only be made to on-line applicants. Candidates selected for interview will be contacted within 28 days. By applying your resume may be considered for other opportunities at SAIT that suit your experience.

SAIT's vision is sharply focused – to be recognized as Canada's premier polytechnic, one of the world's finest, setting the standard in education, training and innovation.

Freedom of Information and Protection of Privacy (FOIP)
The personal information recorded on the application form is being collected under the authority of the Post Secondary Learning Act and Section 33c of the Freedom of Information and Protection of Privacy (FOIP) Act. The information will be used for purpose(s) of employee payroll and administration and is protected by the privacy provisions of the Freedom of Information and Protection of Privacy (FOIP) Act. If you require additional information concerning the collection and use of this personal information, please contact the FOIP Coordinator in Human Resources at 284-8633.


 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window