where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

331 views
Job Seeks
Dmitry
Dmitry
04:04 Jul-28-2007
NDT - gaz, main pipelines

Job Location: Russia, anywhere

The resume.
The certificated expert (Body of accreditation -
Profsertiko, Minsk, Byelorussia) in the field of not destroying control
(NDT - Non destructive testing) searches for work in your organization.
Specialization - the main
pipelines (gas - oil pipelines). I have certificates by 4 kinds :1.
X-ray graf - 2-nd level (RT) 2. The ultrasonic control - 2-nd level (UT)
- certificates .3. The visual control - 2-nd level (VT). 4. The
capillary control . LEVEL RT 2-nd sectors - the main pipelines,
industrial power. Levels UT and VT - in 1-st sector - the main
pipelines.
Operational experience: I work in Open Society "Beltransgas"",
management "Belgasenergo", laboratory NDT the engineering center - 2,5
years . I perform works on quality assurance of welded connections and
diagnostics of a body of a pipe of the main pipelines (gas mains),
stations, AGNKS, compressor stations methods RT, UT (the ultrasonic
control ), VT etc. In a various range of thickness and diameters under
specifications and technical documentation or the customer. (ÂÑÍ012-88,
ÐÒÌ-2004)
Performed works: search and acknowledgement of the declared defects
after intratrumpet diagnostics ) on gas-transport system of Byelorussia
Yamal-Europe, etc., and also on gas mains taps Minsk-Gomel,
Minsk-Grodno, etc. Direct participation in repair work on elimination of
defects of the specified gas mains as responsible for performance and
the control of repair work over laboratory NDT.
Quality assurance of welded connections of gas mains (îáâÿçêà)
compressors at compressor station the Jamal-Europe with the reporting to
the inspector of the technical control of the Russian Federation.
Participation in elimination of failures.
Devices and installations: RT- Arina - 02,-5., Gammarid - 192, ERESCO
MF, etc. UT - UD2 - 70, UD4 - T(tomografic).
Participation and development of new technics at magnetization pipes at
repair work.
The expert of republican competition of welders 2006.
The age of 25 years, is responsible, executive, without bad habits,
physically
healthy, morally steady. The marital status - single. Has ended the
Belorussian-Russian university Mogilyov on a speciality " Devices and
methods of
NDT - Non destructive testing of materials and products".
I search for highly paid work on a speciality, in adjacent areas or any
- watch, long-term watch,
platforms a-shelf, heavy working conditions and etc.

P.S.
On specificity of work I am often in business trips. Therefore to
long-term business trips it is ready. Conditions of a payment approach.
From its part I guarantee responsible performance of works in not
dependences on conditions.
I possess an initial level of English language. Earlier English was
above a level, but because of absence of practice in informal
conversation has lost skill. In case of the positive answer of you, I
undertake to lift in the shortest terms a level of English, on how many
it is possible, with the tutor.

I can consider other variants.



 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window