where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Acoustic Emission Consulting, Inc.
Acoustic Emission Consulting, Inc. specializes in the design of small portable AE instruments for field and lab use.

221 views
Job Seeks
WALID MEGAHED
WALID MEGAHED
00:18 Aug-09-2007
ENGINEER WELDING / QC / INSPECTION

Job Location: MIDDLE EAST / ANY

•International Weldig Engineer (IWE) , Austrian Welding Institude (SZA) – Schweiâtechische Zentralanstalt – Austria
Certificate No IWE AT 0504
•Faculty of Engineering ,Tanta University , B.Sc. Engineering ( Graduation date:1997)

CSWIP 3.1 (CSWIP CERT NO 21078) http://www.cswip.com
(DATE OF EXPIRY 14 AUGUST 2010 )
NDT
Certificates Level II(two) in the non-destructive testing discipline stated below according to the rules required of the American society for non-destructive testing ASNT-TC-1A. ( Ultrasonic test , Radiographic test , Penetrate test & Magnetic test) .
Courses • Training course “Pressure Vessels” (Middle East Advisory
Group).
• Welding Metallurgy for the welding inspection .
• Training and application in paint inspection.
• Training course and application in corrosion evaluation and
corrosion control.
• Course of study of FROSIO NS 476 (corrosion and protection
against corrosion).
• Drill stem design and inspection.
Companies Approval

• Saudi Aramco SAP#70004999
• RINA ( Registro Italiano Navale ) Offshore
• PETROBLE and QARUN(Apache Corp)




 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window