where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
237 views
Job Offers
Jack King
Jack King
03:47 Aug-09-2007
NDT Development Leader

Job Location: Houston / Worldwide
offered by  

Major Company seeks a unique individual with excellent academic foundation in engineering and / or the sciences and a decade plus of experience in the development and application of a variety of existing and emergent NDT technologies to practical field level problems in a variety of materials testing needs but dominantly ferrous and alloy metals used in high pressure / high temperature applications in challenging environments.

The Leader will have a wide geographic responsibility within a very large organization and must therefore be skilled and have a track record of accomplishment in mobilizing and implementing development programs among independent business units. The Leader must be able to create a consensus about adaptation and application of NDT technology and practice to contribute to the solution of critically important issues in reliability, safety, fitness for service, materials selection and specification, welding and joining, maintenance and other collateral aspects of safe and economical operation of complex process systems. The Leader must be already authorized to work in the USA or the UK and must have ability to travel substantial amounts of time. The Leader will have at least 15 years or more of full time employment remaining in his / her career. Level II or III certification in several methodologies is strongly preferred.

This direct hire position carries an extremely attractive salary well over $125,000 USD and participation in the Company's annual bonus along with superb fringe benefits.

To respond, send your detailed resume (including patents and publications and your entire career history) to: jack.king@njksearch.com
Newman-Johnson-King, Inc. Search Consultants
Rockport, TX
We have many other ads and our credentials on Monster.com - place the search phrase "Newman Johnson King" in the search window.


 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window