where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1889 views
Technical Discussions
Chris Coughlin
Chris Coughlin
00:42 Feb-21-2001
Low Frequency UT Pulser/Receiver Board

Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?

Thanks in advance,
Chris


    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
00:26 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Try Physical Acoustics Princeton New Jersey www.pacndt.com. They had a PAC-IPR-90 Boards which went down to 100 Khz.


    
 
 
Wolfgang Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Wolfgang Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:14 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
Dear Chris,
our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.




    
 
 
Rolf D. on behalf of Dr. Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Rolf D. on behalf of Dr. Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:49 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Please use for Forum Posts the email address of your Profile
or update your profile accordingly.

Rolf Diederichs

: : Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
: .
: : Thanks in advance,
: : Chris
: .
: Dear Chris,
: our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
: For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.
:
.



    
 
 
Michael H. Dalichow
Michael H. Dalichow
00:53 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Dear Chris:
Quality Network, Inc. (QNET) offers pulser/receiver and A/DC boards for various applications. The standard frequency range of 500kHz to 20MHz can be complimented with optional frequency filters ranging from 20kHz to 27MHz, and we can provide you with virtually any brad or narrow band filter within this range. For more information please logon to http://www.qnetworld.com/ultrasonic_testing/pcus_11.html.
I you have any questions please send email or call (973) 726-8399.
Sincerely, Michael


    
 
 
Wieslaw Bicz
Wieslaw Bicz
00:59 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We can offer you such board (with PCI connector and external pulser, that can be adapted to your needs).

Wieslaw Bicz



    
 
 
Hanspeter Loertscher
Hanspeter Loertscher
00:38 Feb-23-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We at QMI can offer you a PCI card for ultrasonic testing in the frequency range of 30kHz to 1 MHz. The card is mounted in a metal case for shielding purposes and is used for multichannel systems. QMI recently installed an air-coupled ultrasonic scanning system using 8 of these cards. This system was presented at the WCNDT in Rome as paper idn209. See ndt.net.


    
 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window