where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

395 views
Job Seeks
MAZHAR RAUF
MAZHAR RAUF
02:07 Oct-04-2007
Welding/Mechanical inspector

Job Location: Middle East

Dear sir,
I am sending my cv , Find here attached,
Please reply me soon.
MAZHAR RAUF
Mobile # 0092-3333631348
HJome # 0092-21-4243321

QA/QC INSPECTOR (MECHANICAL/WELDING)


MAZHAR RAUF A-1648 -Gulshan-e-Hadeed,Bin Qasim;
Phase II -Karachi 49-PAKISTAN
Email Id mrauuf@yahoo.com
Mobile No-0092-333-3631348
Res.Tel No-0092-21-4243321
----------------------------------------------------------------------------------------------------------------------------------

Education &Technical Qualification:

§ Diploma of Associate Engineer (Mechanical/Welding Technology)

§ Diploma of European Welding Inspection Practitioner (EWF)
§ Registered Welding Inspector- Number.2606 (TWI)

§ Certified Welding Inspector CSWIP-3.1 (Valid up to 2012)

§ Certified ASNT Level II in PT/MT/RT

§ Approved Welding/Mechanical Inspector from S.Aramco (SAP# 70005681)

In house Training/course-Jotun Paint(Pre-treatment and application)

Career Objective: Continuous learning and keeping abreast of latest technological developments.keeping track of the standard philosophies followed in various industries.To utilize my skills and strengths for the benefit of the employer.

Personal Detail:
Date of birth : 23/2/1958
Marital Status : Married
Nationality : Pakistani
Driving license : UAE (Dubai)
Professional Experience: More than 25 years experience in inspection of welding visual, dimensional, pressure component, piping, tanks & heavy structure(Bridges)
I have worked with several reputed construction companies in U.A.E, Qatar & Saudi Arabia.
Conversant with international code/standards like,ASME sec.IX, ASME sec.VIII, ASME sec.II, ASME B 31.3, API 1102, API 1104, API 650, API 620, API 653 & AWS D1.1.
Through knowledge in SMAW,GTAW,GMAW,FCAW,ESW,SAW and cutting related processes.
Page 1 of 3

Company : Olayan Descon Engineering Company K.S.A.

Project :Khursaniyah Producing Facilities.(Snamprogetti &S.Aramco)

Position : QA/QC Inspector (Mechanical &Welding) for tanks erection.(API 650 & 620)

Duration : August 2006 to August 2007

Company : Olayan Descon Engineering Company K.S.A.

Position :QA/QC Inspector (Mechanical &Welding)

Duration : October 2004 to 2005

Projects : Dahran Additional Facilities of Storage Tanks (S.Aramco)

Company : Olayan Descon Engineering Company K.S.A.

Position :QA/QC Inspector (Mechanical &Welding)

Duration : October 2002 to 2004 :> (WORK SHOP IN JUBAIL INDUSTRIAL CITY)

Responsibilities *Welding Inspection including weld fitup.
*Monitoring during welding verification of pre-heat/inter pass temp/heat in put etc.
*Stage inspection &Final inspection before PWHT or Hydro Test.
*Welder qualification as per ASME sec IX.
*Control of welding consumable.
*Monitoring welder performance.
*Compliance work with WPS.
*Dimensions Inspection.
*Evaluation of Test Results & reports.
*RT film interpretation.
*Co-ordination with Client & third party.
*Witness of NDE related activities.
*Development of new WPS.
*Documentation.

Company :Samsung Corporation Engineering Group

Position :QA/QC Inspector (Mechanical &Welding)

Duration :September 2000 to 2002

Project :Khuff Gas pipeline replacement project for QGPC-QATAR
Cross Country pipeline 36” dia 4Nos Stations – 2” dia to 30”dia.


Page 2 of 3
Company :Global NDE Services

Position : NDE Inspector.

Duration : 1999 to 2000

Responsibility : Welding and Radiographic inspection. :Cleveland Bridge & Engineering Pvt. Ltd.Dubai-UAE.

Position : QC Welding Inspector (Supervisor)

Duration : 1981 to 1998

Projects
· Ghazlan Desalination Plant (Saudi Arabia)
· Dubai Aluminum-DUBAL (Dubai)
· Jam Nagir Oil Field -Pile Cap (India)
· Lonto Higma Bridge (Hong Kong)
· Habco Power Plant (Pakistan)
· Dubai Gas Complex-DUGAS (Dubai)
· Ruwais Oil Refinery (Abu Dhabi)
· Sabia Power Station (Kuwait)
· Aluminum of Bahrain-ALBA (Bahrain)
· Khartoum Power Plant (Sudan)
· Sultan Qaboos Sea port (Sultanate of Oman)

Responsibilities
Ø Monitoring the capability of each welder on the basis of Radiographic Reports.
Ø Checking all welding activities is in compliance with the applicable code,standards and specification.
Ø Monitoring & witness of WPS/PQR /WQT/PT/MT/HT/PMI
Ø Co-ordination with Third party as well as client related to welding and NDE.
Ø Review of mill certificates,consumable MTC,calibration certificates of equipments.
Ø Checking that only approved electrode,wire and gas are used.
Ø Randomly checking welding parameters according to approved WPS(Ampere,voltage,Travel speed and Gas flow rate)
Ø Initiate DCR/NCR and following for correction as required.
Ø Checking the adequacy of the heat treatment technique and the record diagram.
Ø After completion of final testing, preparing all documents and submitting it to the Client.


Yours sincerely,
MAZHAR RAUF

Page 3 of 3


    
 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window