The Largest Open Access Portal of Nondestructive Testing (NDT)

654 views Technical Discussions Brian Brian 03:53 Feb-22-2001 Eddy Current Training Does anyone know of an eddy current training facility located close to Venezuela?    Reply  Translate  Close   William Blum Consultant, Training, Level III Services NDT Consulting Group Inc., USA, Joined Nov 2000, 92 William Blum Consultant, Training, Level III Services NDT Consulting Group Inc., USA, Joined Nov 2000 92 07:33 Feb-22-2001 Re: Eddy Current Training : Does anyone know of an eddy current training facility located close to Venezuela? . Bright Technical Services Inc. has an affiliate in Venezuela conducting courses in most NDT methods. You can contact Mr. Saint-Surin here: Herve Saint-Surin S.D. International C.A. Cel: (58) 14-9250142 TelFax: (58) 2-7518585 email hsaint@cantv.net William E. Blum Managing Director Bright Technical Services Inc. www.brighttechnical.com wblum@brightechnical.com USA Toll Free 1-877-638-2441 Fax/Voice Mail 1-435-417-3992 Sweden 46-42-14 39 99 Bright Technical Services Inc.    Reply  Translate  Close

Product Spotlight High-performance Linear Phased Array Probes StandPhoenix Inspection Systems Limited Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w ... ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications. > 5 Showcases5 Videos ISAFE3 Intrinsically Safe Sensor System StandVallen-Systeme GmbH ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica ... l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A. > 2 Showcases FD800 Bench Top Flaw Detectors StandElcometer NDT The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater ... ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs. > 3 Showcases3 Videos MANTIS StandEddyfi Technologies MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators ... . This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections. > 19 Showcases22 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996