where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
330 views
Job Offers
Applus RTD
Applus RTD
05:12 Nov-29-2007
Electronics Development Engineer

Posted by  
Job Location: Rotterdam (The Netherlands)

The division of Project Services (PS) occupies with non-destructive research to pipelines and other research. Is used by Applus RTD PS developed inspection methods like Rotascan and PIT.
The activities are mainly abroad carried out.

Concerning the increasing activities there is a vacancy for the function of:


Electronics Development Engineer (Fulltime)

Function

Development of software for existing and new to develop ultrasonic research equipment in a multidisciplinary team

Maintenance of existing software/electronics

Recount of software equipment

Investigate/analyse of existing mechanics/ appliances and making improve proposals/create modifications

Accomplish failure analysis at repairing equipment

Essays of construction regulations

Essays required documentation( like a manual, maintenance requirements)

Assistance to Technical Support


Profile

You have work experience and/or completed training established HBO work- and think level

Knowledge and experience with digital and analogue electronics

Follows developments in the field of electronics careful

Analytical intellect

Good contactual properties and you communicate clearly

Dutch and English in word and writing (also technical)

Compliant with daily hectics in your work environment

Creative, critical and curious

Willingness to travel around the world


Are u interested?

For further information about contents of the function you can contact Edwin Tromp, (+31)10-208 8 108, email: edwin.tromp@applusrtd.com.

Your written application, in which you announce your motivation you can aim to division Personnel & Organisation, attn. Ralph Meij, email: ralph.meij@applusrtd.com



 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window