where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

380 views
Job Seeks
Sudheer.S
NDT Inspector, Working As Piping And Welding Inspector
India, Joined Jul 2008, 1

Sudheer.S

NDT Inspector, Working As Piping And Welding Inspector
India,
Joined Jul 2008
1
08:32 Jul-30-2008
Certified Welding inspector

Job Location: India

I have more than 11 years of substantial experience in the field of Quality Control and Quality Assurance of large projects in power utilities, Petrochemical and Oil and Gas Sectors. I enjoy working in a high energy and high performance work environment. I have worked on and learned a great deal from several very interesting and complex commercial projects. I am also well-experienced in Heat Treatment related job function Management; NDT & DT. Currently I am leading an extremely talented Piping & welding inspector's team in Chiyoda Technip Joint Venture (CTJV) project, in Qatar. At the completion of this project in August 6th 2008 I will be anxious to take on new challenges and build upon my knowledge base. I am excited by the prospect of working with an organization that is both an unquestioned leader in its programming niche and an enthusiastic risk taker in an entirely new frontier.
I have attached my recent resume, which details my Qualifications and suggests how I might be of service to your organization & l can make a direct and immediate contribution to your department


 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window