where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ZETEC, Inc.
Zetec is a global leader in nondestructive testing (NDT) solutions for the critical inspection needs of industries the world counts on every day, ...
222 views
Job Offers
Chris Meakin
Chris Meakin
07:59 Jul-31-2008
Field Technicians, Project Managers, Project Engineers

Posted by  
Job Location: Abu Dhabi

Naturally being part of the world’s largest privately held company (Koch Industries), Quest TruTec has many advantages over its competitors. As a well established company, we’ve experienced positive growth since inception and have never had to lay an employee off. Quest TruTec is a company who invents, designs and manufactures all our own advanced inspection technologies (i.e. FTIS, LOTIS, etc.), ultimately providing us with a unique position within the industries we serve. With many new technologies under development, which we anticipate nothing other but a bright future for all those employees involved.

Our newest office in Abu Dhabi is now soliciting resumes for NDT Field Technicians, Project Managers and Project Engineers. This office will supply advance testing and engineering services through out the Middle East utilizing our proprietary NDE technologies. At no cost to the employee, all new employee’s will receive 3-9 months training on our advanced NDE technologies at our training facility in Seattle, Washington, USA before being placed into the field. All job openings are permanent positions.

Candidates applying for this position MUST:
- already live in the Abu Dhabi or surrounding area.
- have their own vehicle
- have strong computer skills
- minimum of 2 years Ultrasonic (UT) experience
- minimum of 2 years working in the PetroChemical industry
- must have a strong mechanical aptitude


Candidates with the following skills is a PLUS:
- engineering degree
- +5 years experience in the PetroChemical industry
- ASNT Level-II or III Ultrasonic (UT) certification, or equivalent
- Background operating robotic systems
- Background in electronics and troubleshooting


 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window