where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

VOGT Ultrasonics GmbH
non-destructive testing, services, training, ultrasonic systems, immersion and squirter inspection systems, PROline, digital radiology
1321 views
Technical Discussions
Matt Clark
Matt Clark
09:40 Mar-01-2001
Tank Inspection

I have a small dilema. Could anyone advise as to a specification or procedure for the on-line inspection of storage tanks for the oil inductry. I am aware of specifications API 653 & API-RP12R1, but do not have copies or familiar with them. We are conncerned with the thickness and corrosion conditions. I would welcome any comments regarding the standard requirements needed to satisfy a continuation of use. Thanks in anticipation.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:16 Mar-01-2001
Re: Tank Inspection
It will depend upon your jursdiction and which is the determining component of the tank.

653 gives clear guidance on external ultrasonic thickness measurement, plus visual and settelement figures for the shell and roof all of which are accessible on line.

The floor is usually the difficult area as it is not generally accessible in service.

API 653 deals with this on either a fixed shutdown interval or perform and RBI analysis to determine the relevent inspection interval.

There are other tools that can be used on line such as submersible robots ( very expensive) or Acoustic Emission.

EEMUA in Europe is the only agency to issue clear rules on the application of Ae for corrosion assessment of storage tank floors on-line.

Often you may want to integrate AE testing into an overall RBI analysis.

If you need more specific data please contact me.


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
03:11 Mar-01-2001
Re: Tank Inspection
: I have a small dilema. Could anyone advise as to a specification or procedure for the on-line inspection of storage tanks for the oil inductry. I am aware of specifications API 653 & API-RP12R1, but do not have copies or familiar with them. We are conncerned with the thickness and corrosion conditions. I would welcome any comments regarding the standard requirements needed to satisfy a continuation of use. Thanks in anticipation.

The thickness and corrosion measurements can be done with ultrasonic thickness gauges having a A-scan display in addition to the usual digital readout, so that the interface of the good and the corroded metals can be seen by its echo. Quantitative specifications of how much corrosion is acceptable can be found from the appropriate specifications and safety agencies. I will be happy to discuss more if needed - Swamy
.



 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 138

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
138
04:19 Mar-02-2001
Re: Tank Inspection
To perform a tank inspection to API-653 requires several codes (API 575, 650, 651, 652, 653, 2015, 2207, ASME V and IX). The codes tend to refer to each other especially 653 and 650.

The new syllabii is available from the link below.


Kindest Regards


Michael Trinidad



 
 Reply 
 
Richard Kazares
Richard Kazares
09:16 Mar-02-2001
Re: Tank Inspection
In addition to manual methods, automated UT offers a resonable cost - and VERY rapid means of performing on-line UT inspection for tanks and many other similar strucutures. The many advantages of using automated systems is the ability to obtian full imaging data of your inspected areas - including very large areas if conditions warrant. The amount of information and insight into the material is significantly greater than through manual A-Scan techniques.

You can check examples of this type of inspection at our website at www.scanningsystems.com - which is now a part of NDT Automation.

: : I have a small dilema. Could anyone advise as to a specification or procedure for the on-line inspection of storage tanks for the oil inductry. I am aware of specifications API 653 & API-RP12R1, but do not have copies or familiar with them. We are conncerned with the thickness and corrosion conditions. I would welcome any comments regarding the standard requirements needed to satisfy a continuation of use. Thanks in anticipation.
.
: The thickness and corrosion measurements can be done with ultrasonic thickness gauges having a A-scan display in addition to the usual digital readout, so that the interface of the good and the corroded metals can be seen by its echo. Quantitative specifications of how much corrosion is acceptable can be found from the appropriate specifications and safety agencies. I will be happy to discuss more if needed - Swamy
: .
.



 
 Reply 
 
Azhatr Qadri
Azhatr Qadri
04:34 Apr-18-2001
Re: Tank Inspection
We are in the process in evluating the difference between Magnetic TFT and AE equipment. Please advise what is better in tems of cost and performance. Please also advise where one can purcahse these equipment second hand.

Regards

Azhar Qadri


 
 Reply 
 
John O Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
09:33 Apr-19-2001
Re: Tank Inspection
You cannot compare TFT and AE they serve totally different functions.
You apply AE as a on-line Tank Floor condition assessment tool to determine when and on what priorities to shutdown a storage tank. It is a risk assessment tool.
This approach saves you money on not taking good tanks out of service too early.

TFT is something you need to do once the decision has been made to take the tank out of service and you use it to identify areas and extent of repairs.

There are a number of TFT Manufacturers
Silverwing UK
MFE Enterprises USA
AEA Sonomatic UK
Rosen Inspection Netherlands

Some have advantages and disadvantages based on plate thickness, reporting and internal floor coatings so choose carefully. Second hand equipment you may need to speak to the manufacturers or trawl the internet.

AE test equipment is much more specialised. The issue is not just one of recording data signals. Experience, interpretation and access to a database of past tests is much more important. Look at thereport on NDT Net from Shell under How Reliable Is AE tank testing ECNDT Denmark.

This higlights how important experience is.


 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window