The Largest Open Access Portal of Nondestructive Testing (NDT)

	208 views Job Seeks balaji balaji 01:03 Aug-29-2008 Ndt technician Job Location: UAE i am having ASNT Level II in UT,RT,MPI and DPI. I have an experince of 8 years in this field. I have an experience in India and Gulf region.   Translate  Close

Product Spotlight 32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2 StandSIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd) ●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi ... on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery > 5 Showcases5 Videos Micro CT StandSanying Precision Instruments Co.,Ltd nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80- ... 300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector. > 2 Showcases2 Videos FAAST-PA! OEM Patented phased Array for high speed UT inspection StandSocomate International Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m ... any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time. > Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection StandPH Tool Reference Standards This set of two blocks has been specially designed for situations where ultrasonic examination tak ... es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996