where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
493 views
Technical Discussions
myaakov
myaakov
02:44 Mar-05-2001
temper etch

I would like to hear the opinion of people using the barkausen noise method to reveal temper etch phenomena.

Thanks Myaakov@excite.com



 
 Reply 
 
Dave Ronson
Dave Ronson
08:25 Mar-06-2001
Re: temper etch
: I would like to hear the opinion of people using the barkausen noise method to reveal temper etch phenomena.
.
: Thanks Myaakov@excite.com
.
We have been using Barkhausen noise for evaluating grinding processes for about 5 years now with great success. It prevented us having to spend a substantial amounts of money on a room to house the etching process, especially with the low flash point of the alcohol rinse.
I guess the only down side to the Barkhausen Noise Inspection process is the need for known burn standards to initally establish the settings. Fixturing to hold the parts is also needed.
We have always followed up with a swab nital etch when ever we found excessive stresses identified with the Barkhausen, and in all cases, we were able to verify the condition.
We have trained our machinists on how to use the machine and they attach a readout of the scan with the work order. We have yet to try and establish standards with chrome on them to look at stress slightly below the chrome plating, which would also be beneficial for us.


 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window