where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
218 views
Job Offers
GMA Al-Salmeen QCS
GMA Al-Salmeen QCS
01:09 Nov-27-2008
NDT Technician and Welding Inspector

Posted by  
Job Location: Abu Dhabi, UAE


Professional Qualification:
AWS-CWI, CSWIP 3.1 will be preferred.
Experience: Experience as ASNT NDT Level I, II in Electro-Mechanical Construction Industry.


Professional Qualification:
ASNT NDT Level I, II in MT, PT, RT, UT
Experience: Minimum FIVE years experience as NDT Technician in Electro-Mechanical Construction Industry.

GMA Al-Salmeen QCS
Email: gma_sal@emirates.net.ae
PO Box 33229
Abu Dhabi, UAE
Tel.: (00971) 2 6745040
Fax: (00971) 2 6746080


 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
...
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window