where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
685 views
Technical Discussions
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
07:05 Mar-22-2001
Has anyone heard of a "Laser Based" temperature measuring devise?

Dear Colleagues,

Has anyone heard of a “Laser Based” system capable of measuring temperature of tube surfaces with temperatures around 1000F? I know that there are several Infrared (IR) devises out there but the problem we have found with them is that the radiant heat severely sacrifices the results. I am looking for a system that is not effected by surrounding temperature.

Regards,
Rich Roberts



 
 Reply 
 
Ishbel Macdonald
Consultant, Engineering Consultant - NDT
Subsea 7, Norway, Joined Nov 1998, 11

Ishbel Macdonald

Consultant, Engineering Consultant - NDT
Subsea 7,
Norway,
Joined Nov 1998
11
08:56 Mar-23-2001
Re: Has anyone heard of a "Laser Based" temperature measuring devise?
Rich

I know that the classification chaps at DNV are now using a laser based thermometer system for looking for hot spots in engine rooms. I managed to find a web page that includes info on a range of systems including one for up to 1400 deg F. Hope this helps.

http://www.detection.com/laserscan/stnew.html

Ishbel Macdonald
NDT Specialist
DNV


 
 Reply 
 
Mark Badrick
Mark Badrick
01:09 Mar-24-2001
Re: Has anyone heard of a "Laser Based" temperature measuring devise?
Richard,

The radiant heat will not be the only problem encountered when trying to measure furnace tube temperatures. I had a paper published in Inspectioneering Journal Jan/Feb 1998 which highlighted several problems encountered while measuring tube temps. We use thermal imagers and a laser based instrument manufactured by Quantum, but I still believe that real accuracy is still not possible (I know I will be corrected, particularly by the many manufacturers out there). If you want to contact me I can give my views in more detail if you wish

Regards

Mark


: Dear Colleagues,
.
: Has anyone heard of a “Laser Based” system capable of measuring temperature of tube surfaces with temperatures around 1000F? I know that there are several Infrared (IR) devises out there but the problem we have found with them is that the radiant heat severely sacrifices the results. I am looking for a system that is not effected by surrounding temperature.
.
: Regards,
: Rich Roberts
.



 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window