where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2029 views
Technical Discussions
Justin Goranson
Justin Goranson
08:46 Mar-27-2001
Corrosion under scale or insulation

We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough


 
 Reply 
 
Tore Ausland
Consultant
Norway, Joined Mar 2001, 3

Tore Ausland

Consultant
Norway,
Joined Mar 2001
3
00:05 Mar-27-2001
Re: Corrosion under scale or insulation
: We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough
.


If you are looking for a permanent coorosion monitoring I will suggest FSM-IT. I am not sure of your access to install FSM-IT on tank surface outside, but if you have this is a very god corrosion monitoring tool.

FSM-IT (Field Signature Method) is a technology great even fore long time (lifetime e.g. 30 year)monitoring.

General features:
-Operator independent readings.
-Can be used for complex geometry (bends, T-bends, y-bends etc..
- Can be used in high temperature environments (up to 400°C)
-Monitors weld Corrosion
- Remote operation.
-Very high sensitivity compared to e.g. UT
-Sensitivity increases as defects develope.

Operator kit with portable instrument and trend software for analysis, reporting.

Best Regards
Tore Ausland


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
03:30 Mar-27-2001
Re: Corrosion under scale or insulation
We use an Acoustic Emission technique on listening and grading corrosion activity in Bulk Liquid Storage Tanks (carbon Steel). Technique works well as the floors are inaccessible and we want to know the condition of the floor plate (whilst scale and sludge) present to determine which tanks to shutdown for inspection.
There is now a portable version developed from a french Petrochemical roject which can be used by untrained (equipment only) operators to do periodic surveys or as permennetly installed sensors.
If you are interested email me direct and I will give you contact details for the technology.


 
 Reply 
 
Cameron Waters
Director, Asia Pacific
Applus RTD, Australia, Joined Nov 1999, 5

Cameron Waters

Director, Asia Pacific
Applus RTD,
Australia,
Joined Nov 1999
5
02:30 Mar-28-2001
Re: Corrosion under scale or insulation

: : We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough


Justin,

The INCOTEST would be perfect for what you are try to achieve, it can take reading either through the scale or direct in contact with the very rough surface. See our web page for a brief explanation of the technique.

Where are you based as there are only a limited number of approved users for the INCOTEST system in the world and I will be able to point you to the one nearest to you.

What is the wall thickness you are trying to measure??

Cheers

============================================
Cameron Waters
pndt
Manager - Advanced Inspection Services
143 Cambridge Street
West Leederville, Perth Western Australia
Ph. +61+8+9382 3844
Fax +61+8+9382 4458
Mobile 0419 831 893
http://www.pndt.com.au




 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:35 Mar-29-2001
Re: Corrosion under scale or insulation
Do you plan to access the tank wall from outside, as is the usual practice? If so, an ultrasonic thickness gauge with A-scan display will do in many cases. If the area is highly radioactive, then you will have to think of a permanently installed probe with read out from outside the area. Let me know whether you have tried this approach - Swamy

: We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough
.



 
 Reply 
 
Fred Raco
Director
CP Industries - Div. of Reunion Industries, Inc., USA, Joined Jan 2001, 6

Fred Raco

Director
CP Industries - Div. of Reunion Industries, Inc.,
USA,
Joined Jan 2001
6
04:55 Mar-29-2001
Re: Corrosion under scale or insulation
: Do you plan to access the tank wall from outside, as is the usual practice? If so, an ultrasonic thickness gauge with A-scan display will do in many cases. If the area is highly radioactive, then you will have to think of a permanently installed probe with read out from outside the area. Let me know whether you have tried this approach - Swamy
.
: : We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough
: .
.
The suggestion of using an A-Scan machine is a good one. May I add that it would be more accurate to use an echo to echo technique instead of interface to first echo. This way, the scale will not be added to the total thickness measurement. Added gain and filtering will also be needed. If you are not familiarwith my terminology, email me and I will explain in more detail.
Good Luck,
FER


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
01:40 Apr-03-2001
Re: Corrosion under scale or insulation
Yes, the echo to echo method is more accurate than the interface to the echo method. In fact, if you are able to get more echoes, taking the interval from the 2nd to 4th or 5th will be much more accurate. This depends of course on the attenuation. If it heavily attenuated, we may have to do with even the interface to the first echo.

: : Do you plan to access the tank wall from outside, as is the usual practice? If so, an ultrasonic thickness gauge with A-scan display will do in many cases. If the area is highly radioactive, then you will have to think of a permanently installed probe with read out from outside the area. Let me know whether you have tried this approach - Swamy
: .
: : : We are looking for a method of testing for corrosion of steel in Nuclear Waste tanks. There is a layer of scale or sludge on most of the walls, and we need a way of either using the technique without removing all of the scale(preferable), or a method of detection after it has been removed, which will cause the surface to be rough
: : .
: .
: The suggestion of using an A-Scan machine is a good one. May I add that it would be more accurate to use an echo to echo technique instead of interface to first echo. This way, the scale will not be added to the total thickness measurement. Added gain and filtering will also be needed. If you are not familiar with my terminology, email me and I will explain in more detail.
: Good Luck,
: FER
.



 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window